Trencher Accessories

Uses square points with a tungsten carbide "fingernail" on each point These work well in most soils, except rocky soils..

Used for areas of heavy, scattered rock conditions. Requires 4 replaceable tungsten carbide rock points for operation (sold separately). Trenches 1-1/2" wide by 4", 5" or 7" deep...

Bullet shaped tungsten carbide points for tough material Mounts in a socket which allows it to be loose and rotate for even wear Shown above with 701-32C carbide points (sold separately)..

Designed to prune roots close to sidewalks, driveways, cart paths or other paved areas, preventing concrete damage. Also used for installing electronic dog fencing, burying irrigation control wires or lines for low voltage lighting...

Designed to prune roots close to sidewalks, driveways, cart paths or other paved areas, preventing concrete damage. Also used for installing electronic dog fencing, burying irrigation control wires or lines for low voltage lighting...

• Designed to prune roots close to sidewalks, driveways, cart paths or other paved areas preventing concrete damage • Also used for installing invisible dog fencing, burying irrigation control wires or lines for low-voltage lighting..

Uses square points with a tungsten carbide "fingernail" on each point These work well in most soils, except rocky soils..

..

This rotor is used to bury 4” drain line in order to divert water from gutter downspouts away from the house. The rotor is also used for installing block or brick edging...

Rock Rotors do not come with points, they must be ordered separately and are sold individually..

..

Used to remove small stumps up to 3-1/2" below the ground surface and no higher than 6" above the ground. May also be used for removing large surface roots...

This rotor is used to bury 4” drain line in order to divert water from gutter downspouts away from the house. The rotor is also used for installing block or brick edging...

Use different sized rotors to dig 3", 4" or 5" deep and slopes 6" to 8" back into bed. The 3" is designed for bed defining and the 4" and 5" are designed for installing steel, plastic or other edging materials..

Designed to define beds for natural edges or for installing edging..

This rotor is used to bury 4” drain line in order to divert water from gutter downspouts away from the house. The rotor is also used for installing block or brick edging...

Used to prepare the bed for a concrete curbing machine. It digs a 2" deep by 9" wide trench...

This rotor is used to bury 4” drain line in order to divert water from gutter downspouts away from the house. The rotor is also used for installing block or brick edging...

Designed to prepare the bed for the concrete curbing machine..

Used for burying wires, cable or edging (plastic, steel or other materials). The 3 point rotor is also used for installing sprinkler systems...

Used for burying wires, cable or edging (plastic, steel or other materials). The 3 point rotor is also used for installing sprinkler systems...

Used for burying wires, cable or edging (plastic, steel or other materials). The 3 point rotor is also used for installing sprinkler systems...

Used for burying wires, cable or edging (plastic, steel or other materials). The 3 point rotor is also used for installing sprinkler systems...

Used for burying wires, cable or edging (plastic, steel or other materials). The 3 point rotor is also used for installing sprinkler systems...

Used for burying wires, cable or edging (plastic, steel or other materials). The 3 point rotor is also used for installing sprinkler systems...

Used for areas of heavy, scattered rock conditions. Requires 4 replaceable tungsten carbide rock points for operation (sold separately). Trenches 1-1/2" wide by 4", 5" or 7" deep...

Used for burying wires, cable or edging (plastic, steel or other materials)...

Used for burying wires, cable or edging (plastic, steel or other materials)...

Used for burying wires, cable or edging (plastic, steel or other materials)...

Used for areas of heavy, scattered rock conditions. Requires 4 replaceable tungsten carbide rock points for operation (sold separately). Trenches 1-1/2" wide by 4", 5" or 7" deep...

Used for burying wires, cable or edging (plastic, steel or other materials)...

Use different sized rotors to dig 3", 4" or 5" deep and slopes 6" to 8" back into bed. The 3" is designed for bed defining and the 4" and 5" are designed for installing steel, plastic or other edging materials..