Features Breathable padding configuration and adjustable compression straps cover critical comfort points on the user's back. Upper-back load adjuster straps allows to proper slack setting to alleviate shoulder stress. Lower lumbar pad with high-friction fabric reduces pressure point slippage Throttle control and on/off engine switch easily accessible on shoulder straps. Storage pouch on each waist strap allow the user to safely stow smart phones and other small personal items. Reliable Honda 2.1hp GXH50 4-stroke engine with low oil shut down sensor. Swivel mounted engine for better operator flexibility and maneuverability. Compatible with MQ's full line of pencil and standard shafts and heads for enhanced application versatility. Specifications Motor Honda GXH50UQXA - Gas Bore x Stroke 1.65 in. × 1.42 in.(42 mm × 36 mm) Displacement 3.0 in (49 cm³) Max. Output 2.5 hp/7,000 rpm Fuel Tank Capacity Approx. 0.32 U.S. Gallons(1.2 liters) Starter Recoil Dimensions 8.9 × 10.8 × 13.9 in.(225 × 274 × 353 mm) Dry Net Weight 12.1 lb. (5.5 kg) Operating Weight 31 lb. (14.1 kg) Accessories Vibrator Heads 900HD Vibrator Head 7/8 diameter steel 1000HD Vibrator Head 1-1/16 diameter steel 1400HD Vibrator Head 1-3/8 diameter steel 1700HD Vibrator Head 1-11/16 diameter steel 2100HD Vibrator Head 2-1/8 diameter steel 2600HD Vibrator Head 2-5/8 diameter steel FS-Series Flexible Shafts FS10 Shaft 10 for 1400 2600HD all RHV head FS12 Shaft 12 for 1400 2600HD all RHV head FS14 Shaft 14 for 1400 2600HD all RHV head FS21 Shaft 21 for 1400 2600HD all RHV head FS3 Shaft 3 for 1400 2600HD all RHV heads FS7 Shaft 7 for 1400 2600HD all RHV heads FSN-Series Flexible Shafts FSN2 Flex-Shaft Narrow 2 for pencil heads FSN7 Flex-Shaft Narrow 7 for pencil heads FSN10 Flex-Shaft Narrow 10 for pencil heads FSN12 Flex-Shaft Narrow 12 for pencil heads FSN14 Flex-Shaft Narrow 14 for pencil heads FSN21 Flex-Shaft Narrow 21 for pencil heads..
$2,140.00 $2,661.00
Features Large vibration isolated handles protect the motor and operator UL compliance testing to USA and Canadian standards for product confidence Strain relief prevents power cord pullouts Quick-disconnect knob for easy shaft removal Cassette style motor improves durability and performance by minimizing friction and enabling the motor to maintain optimum RPM Flow through ventilation reduces contamination by taking in air from the rear of the motor Flexible shafts available in lengths from 2 to 21 feet Ideal for steel vibrator heads available from 7/8" to 1-1/16" diameter Specifications Motor 115 V - 1 hp Amps 10 amps RPM 22,000 RPM Shaft Compatibility FS (2 to 21 ft.) Head Compatibility 7/8 in to 1-1/16 in Dimensions 13.5 in x 8.75 in x 7.75 in Weight 11 lbs Accessories  Vibrator Heads  900HD Vibrator Head 7/8 diameter steel 1000HD Vibrator Head 1-1/16 diameter steel FSN-Series Flexible Shafts FSN2 Flex-Shaft Narrow 2 for pencil heads FSN7 Flex-Shaft Narrow 7 for pencil heads FSN10 Flex-Shaft Narrow 10 for pencil heads FSN12 Flex-Shaft Narrow 12 for pencil heads FSN14 Flex-Shaft Narrow 14 for pencil heads FSN21 Flex-Shaft Narrow 21 for pencil heads..
$613.00
Features Large vibration isolated handles protect the motor and operator CE compliance testing to European standards for product confidence Strain relief prevents power cord pullouts Quick-disconnect knob for easy shaft removal Cassette style motor improves durability and performance by minimizing friction and enabling the motor to maintain optimum RPM Flow through ventilation reduces contamination by taking in air from the rear of the motor Flexible shafts available in lengths from 3 to 21 feet Ideal for steel vibrator heads available from 1-3/8" to 2-1/8" in diameter Specifications Amps 7.5 Voltage/ Frequency 230v 50/60Hz Hp(Kw) 2(1.8) RPM 18000 Weight 13(6) Required Shaft FS Plugs WITHOUT Accessories Vibrator Heads 1400HD Vibrator Head 1-3/8 diameter steel 1700HD Vibrator Head 1-11/16 diameter steel 2100HD Vibrator Head 2-1/8 diameter steel FS-Series Flexible Shafts FS10 Shaft 10 for 1400 2600HD all RHV head FS12 Shaft 12 for 1400 2600HD all RHV head FS14 Shaft 14 for 1400 2600HD all RHV head FS21 Shaft 21 for 1400 2600HD all RHV head FS3 Shaft 3 for 1400 2600HD all RHV heads FS7 Shaft 7 for 1400 2600HD all RHV heads  ..
$663.00
Multiquip CV2E Vibrator Motor - 2 hp 230V Features Large vibration isolated handles protect the motor and operator Strain relief prevents power cord pullouts Quick-disconnect knob for easy shaft removal Cassette style motor improves durability and performance by minimizing friction and enabling the motor to maintain optimum RPM Flow through ventilation reduces contamination by taking in air from the rear of the motor Flexible shafts available in lengths from 2 to 21 feet Ideal for steel vibrator heads available from 1-3/8" to 2-1/8" in diameter Accessories Vibrator Heads 1400HD Vibrator Head 1-3/8 diameter steel 1700HD Vibrator Head 1-11/16 diameter steel 2100HD Vibrator Head 2-1/8 diameter steel FS-Series Flexible Shafts FS10 Shaft 10 for 1400 2600HD all RHV head FS12 Shaft 12 for 1400 2600HD all RHV head FS14 Shaft 14 for 1400 2600HD all RHV head FS21 Shaft 21 for 1400 2600HD all RHV head FS3 Shaft 3 for 1400 2600HD all RHV heads FS7 Shaft 7 for 1400 2600HD all RHV heads  ..
$589.00 $705.00
(Comes with handle and shoulder strap) The quick replacement of its components provides maximum flexibility for everyday operations and helps reduce costs. With only a few simple steps the vibrator head of the IRFUflex Series can be exchanged. The modular system with its flexible, but extremely robust, quick connect coupling makes it possible. With the integrated frequency converter in combination with various vibrator heads you are perfectly prepared for all kinds of tasks, retrofitting is quick and easy. Quick exchange of vibrator heads. Just one screw to loosen and the coupling can be disconnected. The IRFUflex is well protected against splash water and dirt by reliable seals and the avoidance of loose parts. Robust design for durability, low wear and low maintenance. High frequency technology provides outstanding results Variety of hose lengths and head sizes are available to match the right configuration to the application Converter Component FUflex4/120 Weight 20.72 lb Voltage 110 - 130 V Current 3.5 A Frequency 50 - 60 Hz Output performance 1.44 kVA Output frequency 200 Hz Protective hose 1.64 ft Feed cable 49.22 ft..
$1,043.00
Features  Long service life: Oil lubrication, dust foam filter and over-load protection increase the service life and helps reduce lifecycle costs. Easy to service: The service-friendly design includes easy-to-access carbon brushes with automatic cut-off to protect the motor. Modular design: The 3-step modular design offers high versatility with several combinations of Superflex hoses and AT-heads depending on the current job requirements. Ergonomic design: The handle is designed to reduced vibrations in your hands and arms. Easy to assemble and use: Comes equipped with quick couplings for easy assembly, and a shoulder strap for increased comfort and convenience. Specification AME 1600 Voltage, V–p–Hz 115V–1–50/60Hz Power, hp (kW) 2.25 (1600) Amperage, (A) 14 Speed, rpm 12 000 Cable length, ft (m) 16 (5) Weight, lbs (kg) 13.5 (6.1) Weighted effective acceleration, m/s² 4.16 Sound power Lpa dB(A) 77..
$719.00
We offer free shipping and fast ship to your door. Features  Engine protection: The robust frame with side covers protects the rubber-mounted engine from external forces. Easy to service: The engine is easy to service with simple access to all service points. Low fuel consumption: The built-in fuel tank provides hours of uninterrupted work. Quick release: A sturdy coupling with quick release makes it easy to attach and release the flexible shaft. Specification AMG 3200 Engine model Honda GX160 UT1 SXS4 SD, 4-strokes Engine speed, rpm 3 000 Power @ 3000 rpm, hp (kW) 4.8 (3.6) Fuel tank capacity, qls (L) 0.82 (3.1) Total weight, lbs (kg) 33.06 (15) Oil “alert” Yes Sound power lpa dB(A) 75,7..
$1,855.00
We offer free shipping and fast ship to your door. Husqvarna Bracket Hight Speed Pneumatic Vibrators 597157201 Features  Quick-release brackets: You can secure the vibrator and increase flexibility during use with the quick-release brackets. Adjustable centrifugal force: You have the flexibility to adjust as you like to suit the job at hand. Quality that lasts: High-quality components and materials such as die cast iron help you optimize life cycle and keep maintenance costs down. Trouble-free operation: One single moving part improves the possibility of trouble-free operation. Service friendly: Easy to replace components. Bearings on the ER series or lamella on the EP series. Silent: An integrated noise reducer makes the vibrators very quiet for a better work environment. Energy efficient: Very cost effective solution if an air compressor is already at the work site. Professional results every time: Helps you increase the density of the concrete and achieve a smooth surface. Specifications Speed, rpm 9,000 Max. centrifugal force, N 8,100 Air consumption, l/min 1,200 Weight, lbs (kg) 21 (9.5) Bracket attachment VT2..
$850.00
Husqvarna Bracket Hight Speed Pneumatic Vibrators 597157201 Features  Quick-release brackets: You can secure the vibrator and increase flexibility during use with the quick-release brackets. Adjustable centrifugal force: You have the flexibility to adjust as you like to suit the job at hand. Quality that lasts: High-quality components and materials such as die cast iron help you optimize life cycle and keep maintenance costs down. Trouble-free operation: One single moving part improves the possibility of trouble-free operation. Service friendly: Easy to replace components. Bearings on the ER series or lamella on the EP series. Silent: An integrated noise reducer makes the vibrators very quiet for a better work environment. Energy efficient: Very cost effective solution if an air compressor is already at the work site. Professional results every time: Helps you increase the density of the concrete and achieve a smooth surface. Specifications Speed, rpm 9,350 Max. centrifugal force, N 10,350 Air consumption, l/min 1,200 Weight, lbs (kg) 22 (10) Bracket attachment VT2..
$900.00
Husqvarna Bracket Hight Speed Pneumatic Vibrators 597157101 Features  Quick-release brackets: You can secure the vibrator and increase flexibility during use with the quick-release brackets. Adjustable centrifugal force: You have the flexibility to adjust as you like to suit the job at hand. Quality that lasts: High-quality components and materials such as die cast iron help you optimize life cycle and keep maintenance costs down. Trouble-free operation: One single moving part improves the possibility of trouble-free operation. Service friendly: Easy to replace components. Bearings on the ER series or lamella on the EP series. Silent: An integrated noise reducer makes the vibrators very quiet for a better work environment. Energy efficient: Very cost effective solution if an air compressor is already at the work site. Professional results every time: Helps you increase the density of the concrete and achieve a smooth surface. Specifications Speed, rpm 9,350 Max. centrifugal force, N 26,800 Air consumption, l/min 1,400 Weight, lbs (kg) 36.4 (16.5) Bracket attachment VT4..
$1,020.00
 Husqvarna Bracket Hight Speed Pneumatic Vibrators 597157101 Features  Quick-release brackets: You can secure the vibrator and increase flexibility during use with the quick-release brackets. Adjustable centrifugal force: You have the flexibility to adjust as you like to suit the job at hand. Quality that lasts: High-quality components and materials such as die cast iron help you optimize life cycle and keep maintenance costs down. Trouble-free operation: One single moving part improves the possibility of trouble-free operation. Service friendly: Easy to replace components. Bearings on the ER series or lamella on the EP series. Silent: An integrated noise reducer makes the vibrators very quiet for a better work environment. Energy efficient: Very cost effective solution if an air compressor is already at the work site. Professional results every time: Helps you increase the density of the concrete and achieve a smooth surface. Specifications Speed, rpm 8,800 Max. centrifugal force, N 31,500 Air consumption, l/min 1,400 Weight, lbs (kg) 40 (18) Bracket attachment VT4..
$1,710.00
Features Large vibration isolated handles protect the motor and operator Strain relief prevents power cord pullouts Cassette style motor improves durability and performance by minimizing friction and enabling the motor to maintain optimum RPM Flow through ventilation reduces contamination by taking in air from the rear of the motor Flexible Shafts -Eight different shaft lengths are available ranging in size from 3 to 21 ft Quick Connect Coupler - Makes setup on the job site fast and easy Ideal for steel vibrator heads available from 1-3/8" to 2-1/8" in diameter Industry’s strongest outer casing constructed of steel flat wire covered by alternating layers of wire mesh, fabric and rubber Super-tough Zenoy Resin housing—concrete won't adhere to it Handles are fixed in rubber motor ends, absorbing the shock if the motor is dropped UL and CSA approved Anyway you go , Multiquip gets the job done better and in less time Specifications Power 2 hp (1.492 kW) Amps 15 amps No-Load RPM 22,000 RPM Shaft Compatibility FS - 3 ft. to 21 ft. Head Compatibility 1-3/8 in to 2-1/8 in Weight 12.5 lbs. Accessories Vibrator Heads 1400HD Vibrator Head 1-3/8 diameter steel 1700HD Vibrator Head 1-11/16 diameter steel 2100HD Vibrator Head 2-1/8 diameter steel FS-Series Flexible Shafts FS10 Shaft 10 for 1400 2600HD all RHV head FS12 Shaft 12 for 1400 2600HD all RHV head FS14 Shaft 14 for 1400 2600HD all RHV head FS21 Shaft 21 for 1400 2600HD all RHV head FS3 Shaft 3 for 1400 2600HD all RHV heads FS7 Shaft 7 for 1400 2600HD all RHV heads..
$650.00
Features Large vibration isolated handles protect the motor and operator UL compliance testing to USA and Canadian standards for product confidence Strain relief prevents power cord pullouts Quick-disconnect knob for easy shaft removal Cassette style motor improves durability and performance by minimizing friction and enabling the motor to maintain optimum RPM Flow through ventilation reduces contamination by taking in air from the rear of the motor Flexible shafts available in lengths from 3 to 21 feet Ideal for steel vibrator heads available from 1-3/8" to 2-5/8" in diameter Specifications Amps 20 Voltage/ Frequency 115v 50/60Hz Hp(Kw) 3(2.4) RPM 19250 Weight 14(6) Required Shaft FS Plugs NEMA 15-20p   Accessories Vibrator Heads 1400HD Vibrator Head 1-3/8 diameter steel 1700HD Vibrator Head 1-11/16 diameter steel 2100HD Vibrator Head 2-1/8 diameter steel 2600HD Vibrator Head 2-5/8 diameter steel FS-Series Flexible Shafts FS10 Shaft 10 for 1400 2600HD all RHV head FS12 Shaft 12 for 1400 2600HD all RHV head FS14 Shaft 14 for 1400 2600HD all RHV head FS21 Shaft 21 for 1400 2600HD all RHV head FS3 Shaft 3 for 1400 2600HD all RHV heads FS7 Shaft 7 for 1400 2600HD all RHV heads  ..
$759.00
Features Large vibration isolated handles protect the motor and operator CE compliance testing to European standards for product confidence   Strain relief prevents power cord pullouts Quick-disconnect knob for easy shaft removal Cassette style motor improves durability and performance by minimizing friction and enabling the motor to maintain optimum RPM Flow through ventilation reduces contamination by taking in air from the rear of the motor Flexible shafts available in lengths from 3 to 21 feet Ideal for steel vibrator heads available from 1-3/8" to 2-5/8" in diameter Specifications Amps 10 Voltage/ Frequency 230v 50/60Hz Hp(Kw) 3(2.4) RPM 19250 Weight 14(6) Required Shaft FS Plugs WITHOUT   Accessories Vibrator Heads 1400HD Vibrator Head 1-3/8 diameter steel 1700HD Vibrator Head 1-11/16 diameter steel 2100HD Vibrator Head 2-1/8 diameter steel 2600HD Vibrator Head 2-5/8 diameter steel FS-Series Flexible Shafts FS10 Shaft 10 for 1400 2600HD all RHV head FS12 Shaft 12 for 1400 2600HD all RHV head FS14 Shaft 14 for 1400 2600HD all RHV head FS21 Shaft 21 for 1400 2600HD all RHV head FS3 Shaft 3 for 1400 2600HD all RHV heads FS7 Shaft 7 for 1400 2600HD all RHV heads  ..
$759.00
The FU162A High Frequency Inverter has a push switch that changes the output frequency to the vibrator head, allowing the operator to keep up with the changing conditions of the concrete mix. Conventional concrete vibrators do not have the option to change motor RPM and frequency. Soft Start mode allows smooth starts even under load. Inverter powers up to two concrete vibrators with four head size options. (Powers only one FX60E6). Maintains top performance in virtually any slump condition with a powerful and highly efficient motor. Rugged control box with sealed electronics. FU162A Controller and FX Vibrators are covered by a one year parts and labor warranty. Contact Multiquip for complete warranty information FU162A Controller powers any of these vibrators: FX30E6 (1.25") FX40G6 (1.7") FX50G6 (2") FX60E6 (2.4") Specifications Unit Specifications Receptacles 2 Weight 19.1 lb 8.7 kg Input Power Voltage 100-120/220-240 Phase Single Amps 20-16/14-10.5 Frequency 50/60 Hz Output Power Voltage 48 Phase Three Amps 19.2 Frequency 100-240 Hz  ..
$2,999.00 $3,357.00
Features Shafts and heads sold separately Swivel mount for easy movement around the job site 4.8 HP Honda engine provides easy starting Use with either steel or rubber vibrator heads Eliminates the need for a dedicated generator on site Specifications Motor (Gas) Honda GX160 - 4.8 hp RPM 3.600 RPM Shaft Compatibility FS (2 to 21 ft.) Head Compatibility 1-3/8 in to 2-5/8 in Dimensions 24 in x 20 in x 18 in Weight 77 lbs Accessories Vibrator Heads 1400HD Vibrator Head 1-3/8 diameter steel 1700HD Vibrator Head 1-11/16 diameter steel 2100HD Vibrator Head 2-1/8 diameter steel 2600HD Vibrator Head 2-5/8 diameter steel FS-Series Flexible Shafts FS10 Shaft 10 for 1400 2600HD all RHV head FS12 Shaft 12 for 1400 2600HD all RHV head FS14 Shaft 14 for 1400 2600HD all RHV head FS21 Shaft 21 for 1400 2600HD all RHV head FS3 Shaft 3 for 1400 2600HD all RHV heads FS7 Shaft 7 for 1400 2600HD all RHV heads..
$1,609.00 $2,003.00
Feature  Backpack has integrated converter to provide high cycle/high frequency performance Fully adjustable backpack for varying size operators Lightweight fabric, padded shoulder straps and even weight distribution allow for extended working periods Vibrator connects to the bottom center of the backpack for easy left or right hand operation The operator is not exposed to heat, exhaust fumes and engine noise BP1000 battery is easy to install with no special tools Six combinations with various heads and shafts The ACBe battery-powered backpack vibrator is a modular system with components sold separately: Item BOC13 fast-charge box Systainer 5100069477/ BOC7 Battery Charger 5100069475 Item BOB10 Li-Ion Battery 5100069472/ BOB14 Li-Ion Battery 5100069473 Item 5100049759: IEe38/34/1.5: 1.5 inch diameter head with 5 foot shaft Item 5100049830: IEe38/34/3: 1.5 inch diameter head with 10 foot shaft Item 5100049831: IEe45/34/1.5: 1.8 inch diameter head with 5 foot shaft Item 5100049832: IEc45/34/3: 1.8 inch diameter head with 10 foot shaft Item 5100049833: IEe58/34/1.5: 2.3 inch diameter head with 5 foot shaft Item 5100049834: IEe58/34/3: 2.3 inch diameter head with 10 foot shaft Specification  Dimensions  L x W x H  296 x 236 x 561 mm Operating weight with BP1000 15 kg Weight without battery 6.9 kg Operating data  Rated current  20 A Input voltage (~3) 51 V Output voltage (~3) 34 V Output frequency  200 Hz Output performance  0.79 kW Protection class  IP24D   SINGLE CYLINDER REPAIR If you have any questions about any products. Please email us at info@singlecylinderstore.com or call us at 877-558-1112..
$1,012.00 $1,435.00
Battery Transport BOX1 for BOB10 and BOB14 Batteries   SINGLE CYLINDER REPAIR If you have any questions about any products. Please email us at info@singlecylinderstore.com or call us at 877-558-1112..
$165.00
ACBe Battery Powered Backpack Vibrator Standard Kit includes 5100058345 ACBe Battery Powered Backpack Vibrator (2) BOB10 Li-Ion Battery 5100069472 (1) BOC13 fast-charge box Systainer 5100069477   Feature  Backpack has integrated converter to provide high cycle/high frequency performance Fully adjustable backpack for varying size operators Lightweight fabric, padded shoulder straps and even weight distribution allow for extended working periods Vibrator connects to the bottom center of the backpack for easy left or right hand operation The operator is not exposed to heat, exhaust fumes and engine noise BP1000 battery is easy to install with no special tools Six combinations with various heads and shafts The ACBe battery-powered backpack vibrator is a modular system with Head and Shaft combo sold separately: Item 5100049759: IEe38/34/1.5: 1.5 inch diameter head with 5 foot shaft Item 5100049830: IEe38/34/3: 1.5 inch diameter head with 10 foot shaft Item 5100049831: IEe45/34/1.5: 1.8 inch diameter head with 5 foot shaft Item 5100049832: IEc45/34/3: 1.8 inch diameter head with 10 foot shaft Item 5100049833: IEe58/34/1.5: 2.3 inch diameter head with 5 foot shaft Item 5100049834: IEe58/34/3: 2.3 inch diameter head with 10 foot shaft Specification  Dimensions  L x W x H  296 x 236 x 561 mm Operating weight with BP1000 15 kg Weight without battery 6.9 kg Operating data  Rated current  20 A Input voltage (~3) 51 V Output voltage (~3) 34 V Output frequency  200 Hz Output performance  0.79 kW Protection class  IP24D   SINGLE CYLINDER REPAIR If you have any questions about any products. Please email us at info@singlecylinderstore.com or call us at 877-558-1112      ..
$0.00
The A 1500 is a compact, lightweight, 1.3-hp (.97 kW), Honda, four cycle engine designed to power Wacker Neuson’s smaller flexible shafts and heads. Wacker Neuson’s newest addition to its HMS (head, motor, shaft) flex-shaft internal vibrator system is an economical and portable gasoline engine. The A 1500 is a compact, lightweight, 1.3-hp (.97 kW), Honda, four cycle engine designed to power Wacker Neuson’s smaller flexible shafts and heads. The gasoline powered HMS system delivers versatile power. Heads and shafts can be easily combined and rapidly exchanged to match the right equipment to the job. With the A 1500’s light weight, only 23.4-lbs. (10.6 kg), and built-in base plate, it is easy to move the A 1500 around the job and since it is gasoline powered, there is no need for an additional generator, according to the manufacturer. Key benefits to the A 1500 engine for the internal vibrators include: • Easy handling due to the low weight and compact dimensions • Ideal power-to-weight ratio provides optimum and economical operation • Easy to operate with simple, easy to access controls • Quick and easy flex-shaft replacement with quick disconnect coupling. • Solid protective cage keeps engine safe • Built-in bottom plate provides extra protection and slides for job site mobility Wacker Neuson’s A 1500 is ideal for smaller concrete consolidation jobs and is suited for on-site vibration of concrete for foundations, walls, columns and slab work, also for in-plant vibration during the production of pipes, slabs, beams, double Ts, columns and walls...
$959.95
Showing 1 to 0 of 35 (0 Pages)