The Ultra Lightweight Saw That Cuts Decorative and Joint Cuts in Concrete. Features  Power transference to blade drive via 2 molded notch 3VX premium belts for better cutting performance and long belt life Easy to maneuver push drive Cyclone air cleaner for increased engine longevity Center cut design making it easier to keep the cut straight Up-cut design for a cleaner cut Adjustable blade alignment 1/8” steel frame 1” or 5/8” arbor with grease bearings Specifications Model # CC1025E-8 CC1025E-8 CC1048H-8 CC1048H-8 Engine//Motor Make Baldor® Baldor®-5/8” shaft Honda® GX160 Honda® GX160-5/8” shaft Engine/Motor Power 2.5 HP, 110V/230V -1PH 2.5 HP, 110V/230V -1PH 4.8 HP, 7.6 Torque (lbs.-ft.) 4.8 HP, 7.6 Torque (lbs.-ft.) Power Source Electric Electric Gas Gas Part # 5800552 5800716 5800551 5800620 Product Weight (lbs) 75 75 110 120 Max. Depth of Cut 2.250” with 8” diameter blade Blade Shaft RPM 6100 Blade Shaft Diameter 1” Arbor Size 1” or .625” option Front Wheels Size 3” x 2” x .750” Rear Wheels Size 5” x 2” x .750” Dimensions 14.5” wide, 34.5” tall, 23.5” long Note: Electric saws do not ship with electric cord or pigtails. 3-Phase powered saws do not include male electric connector for control box SINGLE CYLINDER REPAIR If you have any questions about any products. Please email us at info@singlecylinderstore.com or call us at 877-558-1112.  ..
$0.00
Features  Heavy duty adjustable operator handles Easy to maneuver push drive Up-cut or down-cut available 1” arbor size with drive pin Compact size for easy transporting Specifications Model # CC1111HUXL-14 Engine//Motor Make Honda® GX390-Upcut Engine/Motor Power 11.7 HP, 19.5 Torque (lbs.-ft.) Blade Capacity 14” Part # 5801020 Product Weight (lbs) 215 Max. Depth of Cut 4.625” with 14” diameter blade Blade Shaft RPM 2650 Blade Shaft Diameter 1” Arbor Size 3” x 2” x .750” Front Wheels Size 8” x 2” x .750” Rear Wheels Size 19.5” wide, 40.750” tall, 36” long Dimensions 4.625” with 14” diameter blade   SINGLE CYLINDER REPAIR If you have any questions about any products. Please email us at info@singlecylinderstore.com or call us at 877-558-1112..
$3,600.72
Features  Heavy duty design, but light weight enough for two people to lift Cyclone air filter (Honda® models) Easy to read built-in depth indicator Dial screw feed raise and lower handle Adjustable heavy duty handles do not rattle like competitor handles Left or right hand sawing Poly V-Belts Water tank (10 gallon) and lifting bale included Specifications Model # CC1211HXL-14 Engine Make Honda GX390 Engine Power Torque (lbs.-ft.) 11.7 HP, 19.5 Part # 5801093 Blade Capacity 14” Product Weight (lbs) 271 Maximum depth of cut with 14” blade:  4-5/8” Blade shaft RPM:  2,600 Blade shaft diameter:  1-1/4” Arbor Size:  1” with single drive pin Blade mounting:  Right or left Blade raise/lower:  Precision screw feed Handle bars:  Adjustable Depth indicator:  Standard   SINGLE CYLINDER REPAIR If you have any questions about any products. Please email us at info@singlecylinderstore.com or call us at 877-558-1112  ..
$3,152.00 $3,300.92
Features  Maximum cutting depth of 1-3/16” Reliable skid plate system for green concrete Heavy duty design but light weight enough for two people to lift Cyclone air filter for increased air flow Up-cut design to keep debris from going back in the cut Blade raise/lower mechanical mechanism with spring loaded release Single ribbed drive belt Specifications     CC125BXL-EE6 Engine Make/Model Baldor Electric Engine Power 2.5 HP Product Weight (lbs) 120 Part Number 5801357 Blade shaft RPM: 2,600 Blade shaft diameter: 1-1/4” Arbor Size: 1” Handle bars: Adjustable Depth indicator: Standard   SINGLE CYLINDER REPAIR If you have any questions about products. Please email us at info@singlecylinderstore.com or call us at 877-558-1112..
$3,474.75 $4,633.00
Diamond Products CC1300XL Gasoline Concrete Saw Diamond Products CC1300XL Hydraulic Concrete Saw Saw Model # Blade Capacity Motor Make Motor/Engine Power Part Number CC1305E1XL-14 14" Baldor® 5 HP-1PH, 230V 5800577 CC1305E3XL-14 14" Baldor® 5 HP-3PH, 230V 5800578A CC1305E3XL-14 14” Baldor® 5 HP, -3PH, 480V 5800578B CC1305E1XL-18 18" Baldor® 5 HP-1PH, 230V 5800580 CC1305E3XL-18 18" Baldor® 5 HP-3PH, 230V 5800581A CC1305E3XL-18 18" Baldor® 5 HP, -3PH, 480V 5800581B CC1310E3XL-20 20" Baldor® 10 HP-3PH,230V 5800589A CC1310E3XL-20 20" Baldor® 10 HP-3PH,460V 5800589B CC1310E3XL-20 20" Baldor® 10 HP-3PH,230V/460V 5800985 Features Heavy duty frame design Cyclone air filter (Honda® models) Easy to maneuver push drive Four position heavy duty handles offer no slack and don’t rattle like other adjustable handles Through rear axle for added strength Solid sealed and self aligning blade shaft bearings Slip-on blade guard for easy blade access Three V-belts for extra power delivery to the blade shaft Left or right side sawing Optional water tank available for dust suppression   Specifications Maximum depth of cut with 14" blade: 4-5/8" Maximum depth of cut with 18" blade:   6-5/8" Maximum depth of cut with 20" blade:  7-5/8" Blade shaft RPM:  2,600 Blade shaft diameter:   1-1/4" Arbor size:  1" with single drive pin Blade mounting:  Right or left Blade raise/lower: Precision screw feed Handle bars:   Adjustable Note: Electric saws do not ship with electric cord or pigtails. 3-Phase powered saws do not include male electric connector for control box For more information options please call us 18775581112    ..
$0.00
Diamond Products CC1300XL Electric Concrete Saw Diamond Products CC1300XL Hydraulic Concrete Saw Saw Model # Blade Capacity Engine Model Engine Power Part Number CC1308HXL-14 14" Honda GX270 8.5 HP, 14.1 (Torque (lbs.-ft.) 5800575 CC1311HXL-14 14" Honda GX390 11.7 HP, 19.5 (Torque (lbs.-ft.) 5800576 CC1313BXL-14 14" Briggs 2100 420cc, 21 (Torque (lbs.-ft.) 5801117 CC1311HUXL-14 14" Honda GX390 upcut 11.7 HP, 19.5 (Torque (lbs.-ft.) 5800871 CC1313BUXL-14 14" Briggs 2100 upcut 420cc, 21 (Torque (lbs.-ft.) 5801118 CC1308HXL-18 18" Honda GX270 8.5 HP, 14.1 (Torque (lbs.-ft.) 5800579 CC1311HXL-18 18" Honda GX390 11.7 HP, 19.5 (Torque (lbs.-ft.) 5800571 CC1313BXL-18 18" Briggs 2100 420cc, 21 (Torque (lbs.-ft.) 5801116 CC1311HUXL-18 18" Honda GX390 upcut 11.7 HP, 19.5 (Torque (lbs.-ft.) 5800872 CC1313BUXL-18 18" Briggs 2100 upcut 420cc, 21 (Torque (lbs.-ft.) 5801119 CC1311HXL-20 20" Honda GX390 11.7 HP, 19.5 (Torque (lbs.-ft.) 5800723 Features Heavy duty frame design Cyclone air filter (Honda® models) Easy to maneuver push drive Four position heavy duty handles offer no slack and don’t rattle like other adjustable handles Through rear axle for added strength Solid sealed and self aligning blade shaft bearings Slip-on blade guard for easy blade access Three V-belts for extra power delivery to the blade shaft Left or right side sawing Optional water tank available for dust suppression   Specifications Maximum depth of cut with 14" blade: 4-5/8" Maximum depth of cut with 18" blade:   6-5/8" Maximum depth of cut with 20" blade:  7-5/8" Blade shaft RPM:  2,600 Blade shaft diameter:   1-1/4" Arbor size:  1" with single drive pin Blade mounting:  Right or left Blade raise/lower: Precision screw feed Handle bars:   Adjustable For more information options please call us 18775581112..
$0.00
Diamond Products CC1300XL Gasoline Concrete Saw Diamond Products CC1300XL Electric Concrete Saw Saw Model # Blade Capacity Motor Make Motor/Engine Power Part Number CC1313HYXL-20 20" Danfoss® 15 GPM 5800724A CC1313HYXL-20 20" Danfoss® 20 GPM 5800724B CC1313HYXL-20 20" Danfoss® 25 GPM 5800724C Features Heavy duty frame design Easy to maneuver push drive Four position heavy duty handles offer no slack and don’t rattle like other adjustable handles Through rear axle for added strength Solid sealed and self aligning blade shaft bearings Slip-on blade guard for easy blade access Three V-belts for extra power delivery to the blade shaft Left or right side sawing Optional water tank available for dust suppression   Specifications Maximum depth of cut with 14" blade: 4-5/8" Maximum depth of cut with 18" blade:   6-5/8" Maximum depth of cut with 20" blade:  7-5/8" Blade shaft RPM:  2,600 Blade shaft diameter:   1-1/4" Arbor size:  1" with single drive pin Blade mounting:  Right or left Blade raise/lower: Precision screw feed Handle bars:   Adjustable *For more information options please call us 18775581112 SINGLE CYLINDER REPAIR If you have any questions about any products. Please email us at info@singlecylinderstore.com or call us at 877-558-1112  ..
$6,307.70
For more information options please call us 18775581112 Features  Electric powered for areas with limited access and where exhaust fumes are not allowed Easy to maneuver push drive Motor can be removed in limited access areas to allow for a single person operation Screw feed raise and lower Full adjustable heavy duty handle design Light-weight aluminum frame and lightest-weight motor Specifications Model # CC1507E3-20 Engine Make Baldor Engine Power 7.5 HP-3PH, 460V Blade Capacity 20" Maximum depth of cut with 14” blade: 4-5/8” Maximum depth of cut with 18” blade: 6-1/2” Maximum depth of cut with 20” blade: 7-1/2” Blade shaft RPM: 2,000 Blade shaft diameter: 1-1/4” Arbor size: 1” with drive pin Blade Raise/Lower: Precision screw feed Handle Bars: Adjustable Part Number 5801500   SINGLE CYLINDER REPAIR If you have any questions about any products. Please email us at info@singlecylinderstore.com or call us at 877-558-1112  ..
$10,205.16
Diamond Products CC1800XL Gas Medium Walk Behind Saw Diamond Products CC1800XL Hydraulic Medium Walk Behind Saw Model # Motor Motor Power Part # 14” Gaurd Part # 20” Gaurd CC1875E1XL-P Baldor® 7.5 HP, 230V-1PH 5800628 5800629 CC1810E3XL-P Baldor® 10 HP, 230V-3PH 5800692A 5800693A CC1810E3XL-P Baldor® 10 HP, 460V-3PH 5800692B 5800693B CC1810E3XL-P Baldor® 10 HP, 575V-3PH 5800692C 5800693C CC1875E1XL-S Baldor® 7.5 HP, 230V-1PH 5800736 5800737 CC1810E3XL-S Baldor® 10 HP, 230V-3PH 5800738A 5800739A CC1810E3XL-S Baldor® 10 HP, 460V-3PH 5800738B 5800739B CC1810E3XL-S Baldor® 10 HP, 575V-3PH 5800738C 5800739C   Features Electric start option on Honda and Briggs Vanguard models Pull start backup on Briggs Vanguard models Push or self propelled models Easy access to battery with heavy duty isolator switch to prevent battery drain Screw feed raise and lower Lifting hook standard on all models Self aligning blade shaft bearings Specifications Maximum depth of cut with 14” blade: 4-5/8” Maximum depth of cut with 18” blade: 6-5/8” Maximum depth of cut with 20” blade: 7-5/8” Blade shaft RPM: 2,600 Blade shaft diameter: 1-1/4” Arbor Size: 1” w/drive pin Blade shaft drive: 3 belt for 11.7HP, 4 belt other models Blade mounting: Right or Left Transmission (self propelled): Eaton Model 6 Drive Speed: 0-80 feet/min Fuel Capacity (gas models): 2 gallons Wheel Dimensions 5” x 1-1/2” x 3/4” (Front) 6” x -1-1/2” x 5/8” (Back) *For more information options please call us 18775581112..
$0.00
Diamond Products CC1800XL Electric Medium Walk Behind Saw Diamond Products CC1800XL Hydraulic Medium Walk Behind Saw Model # Engine Engine Power  Torque (lbs.-ft) Part # 14” Gaurd Part # 20” Gaurd CC1811HXL-P Honda® GX390 Gas 11.7 HP, 19.5  5800694 5800695 CC1811HEXL-P Honda® GX390 Gas ► 11.7 HP, 19.5  55802258 5802259 CC1813BXL-P Briggs® 2100 Series ◊ 420cc, 21  5801114 5801115 CC1816BVXL-P Briggs® Vanguard q 16 HP 5800696 5800697 CC1811HXL-S Honda® GX390 Gas 11.7 HP, 19.5  5800643 5800644 CC1811HEXL-S Honda® GX390 Gas ► 11.7 HP, 19.5  5802260 5802261 CC1813BXL-S Briggs® 2100 Series ◊ 420cc, 21  5801112 5801113 CC1816BVXL-S Briggs® Vanguard q 16 HP 5800645 5800646 CC1820HXL-S Honda®GX630 ►w 20.8 HP, 35.6 5800667 5800668 CC1823BVXL-S Briggs®Vanguard ►w q 23 HP 5801218 5801219 ► Electric start w Includes remote cyclone air cleaner q Gross horsepower at 3600 RPM per SAEJ1940 ◊ Briggs 2100 Series models include a Diamond Products 3-year extended warranty-Gross horsepower at 2600 RPM per SAE J1940   Features Electric start option on Honda and Briggs Vanguard models Pull start backup on Briggs Vanguard models Push or self propelled models Easy access to battery with heavy duty isolator switch to prevent battery drain Screw feed raise and lower Lifting hook standard on all models Self aligning blade shaft bearings Specifications Maximum depth of cut with 14” blade: 4-5/8” Maximum depth of cut with 18” blade: 6-5/8” Maximum depth of cut with 20” blade: 7-5/8” Blade shaft RPM: 2,600 Blade shaft diameter: 1-1/4” Arbor Size: 1” w/drive pin Blade shaft drive: 3 belt for 11.7HP, 4 belt other models Blade mounting: Right or Left Transmission (self propelled): Eaton Model 6 Drive Speed: 0-80 feet/min Fuel Capacity (gas models): 2 gallons Wheel Dimensions 5” x 1-1/2” x 3/4” (Front) 6” x -1-1/2” x 5/8” (Back) *For more information options please call us 18775581112..
$0.00
Features  Briggs Vanguard engine converted to propane vapor draw Horizonally-mounted 20 lbs. propane tank Self-propelled travel for easy cutting Easy access to battery with a heavy-duty isolator switch to prevent battery drain Screw feed raise and lower system Lifting hook standard on all models Self-aligning blade shaft bearings Includes: electric start, low oil alert, and hour meter Specifications Model # CC1823BVXLP-14S Engine Make Converted Briggs® Vanguard Engine Power 23 HP Blade Capacity 14” Max Depth of Cut with 14" Blade 4-4/8" Blade Shaft RPM 2600 Blade Shaft Diameter 1-1/4" Arbor Size 1" with single drive pin Blade Shaft Drive 4 belts Blade Mounting Right or left Transmission Eaton Model 6 Drive Speed 0-80 feet per minute Fuel Tank Size 20 pound Wheel Dimension 5" x 1-1/2" x 3/4" (Front) 6" x 1/-1/2" x 5/8" (Back) Part Number 5801426   SINGLE CYLINDER REPAIR If you have any questions about any products. Please email us at info@singlecylinderstore.com or call us at 877-558-1112  ..
$12,032.76
For more information options please call us 18775581112 Features  Capable of .110” to .250” thick blades Self propelled drive Raise and lower adjustable handle bars Heavy duty handle design Vibration dampeners that prevent rattling that disrupts the skid plate function Self aligning blade shaft bearings Easy access to battery with heavy duty isolator switch to prevent power drain Up-cut design to keep debris from going back in the cut Lifting hook for easy transport Includes: Electric start, low oil alert and tach/hour meter Specifications Max. Depth of Cut 3-5/8” with 14” diameter blade Blade Shaft RPM 3500 Blade Shaft Diameter 1-1/4” Arbor Size 1” with single drive pin Blade Raise/Lower Electric actuation Transmission Eaton Model 6 Drive Speed 0-80 feet per minute Engine Make/Model Honda® GX630 Engine Power 20.8 HP, 35.6 Torque (lbs.-ft) Part # 5801128 Product Weight (lbs) 420 SINGLE CYLINDER REPAIR If you have any questions about any products. Please email us at info@singlecylinderstore.com or call us at 877-558-1112  ..
$15,478.50 $19,305.00
Features Heavy duty design, but light-weight enough for two people to lift Cyclone air filter Easy to read built-in depth indicator Precision dial screw feed raise and lower handle Poly V-Belts Water tank* and lifting bale included (for dust suppression when dry cutting) Specifications Model # CCE0911H-20 Engine Make Honda GX390 Engine Power 11.7 HP Blade Capacity 20” Max. Depth of Cut 7-5/8" Blade Shaft RPM 2600 Blade Shaft Diameter 1" Arbor Size 1" with single drive pin Blade Raise/Lower Precision screw feed Sawing Side Right side only Weight 275 lbs. Part # 5801613   SINGLE CYLINDER REPAIR If you have any questions about any products. Please email us at info@singlecylinderstore.com or call us at 877-558-1112  ..
$3,097.02
Features Soff-Cut® technology Husqvarna Soff-Cut is a unique patented system for early entry concrete sawing. This technology enables concrete to be cut within the first one or two hours of finishing and before final set. Husqvarna Soff-Cut® provides the best solution for minimizing the risk of random cracking, and it simplifies the working process, compared to conventional sawing. Specifications Blade range, in (mm) 150 D uses ProEdge blades Depth of cut, in (mm) 1/2 (12) Maximum power, hp (kW)* 5.5 (4.1) Engine specifications Kohler CH255 Average bladeshaft, rpm 3,800 Blade flanges, in (mm) 3 (76) Displacement, cu in (l) 10.8 (.18) Bore/stroke, in (mm) 2.7/1.9 (68/49) Maximum weight crated, lbs (kg) 110 (50) Maximum weight uncrated, lbs (kg) 97(44) Dimensions uncrated, pointer and blade guard up, handles in, in (mm) L x W x H 68 x 19 x 33-1/2 (1,727 x 483 x 851) Power source Gasoline Arbor size Triangular Bladeshaft diamter, in (mm) 3/4 (19) Cylinders/cycle 1/4 Fuel capacity, gal (l) 0.7 (2.7) Air filter Dry type dual element w/precleaner Starter Recoil Engine cooling Air Axle front/rear, in (mm) 1/1 (25.4/25.4) Wheels front, in (mm) 3 x 3 (76 x76) 1 each Wheels rear, in (mm) 3 x 3 (76 x 76) 2 each Blade guard type Enclosed Number of belts 1 Blade depth control Manual Oil capacity, qt (l) 0.63 (.6) Handlebar adjustment Folding/fixed with locking pin Transmission type Push   SINGLE CYLINDER REPAIR If you have any questions about any products . Please email us at info@singlecylinderstore.com or call us at 877-558-1112...
$0.00
Applications Ideal for cutting in difficult to access job sites. Utilized for very small road repair jobs. A great rental saw, it is perfect for residential jobs. Left-hand sawing only. Benefits Very lightweight and compact, it eases transporting and handling of the saw. Adjustable handle and extendable right rear wheel increases stability and reduces fatigue. Gas assisted raise/lower system reduces the force required to raise and lower the blade in and out of the cut. Excellent power transmission to the blade due to the Poly V-belt, which increases production. Specifications Maximum blade diameter, in (mm) 14 (350) Maximum depth of cut, in (mm) 4-5/8 (117) Average bladeshaft, rpm 3,500 Blade flanges, in (mm) 4-1/2 (114) Maximum weight crated, lbs (kg) 198 (90) Maximum weight uncrated, lbs (kg) 117 (53) Maximum blade diameter, in (mm) 14 (350) Maximum depth of cut, in (mm) 4-5/8 (117) Power source Robin EX27X Maximum power, hp (kW)* 8-1/2 (6) Power at bladeshaft, hp (kW) N/A Arbor size, in (mm) 1 (25) Bladeshaft diameter, in (mm) 3/4 (19) Cylinders/cycle 1/4 Fuel capacity, gal (1) 1.6 (6.1) Air filter Dry type dual element cyclone Starter Recoil Engine cooling Air Axle front/rear, in (mm) Wheels front, in (mm) 4 x 1-1/2 x 5/8 (114 x 38 x 16) Wheels rear, in (mm) 6 x 1-1/2 x 5/8 (152 x 38 x 16) Blade guard type Bolt On Number of belts 14 rib poly V Blade depth control Screw feed Dimensions uncrated, pointer and blade guard up, handles in, in (mm) L x W x H 36 x 15 x 39 (915 x 381 x 990) Displacement, cu in (l) 16.2 (265) Bore/stroke, in (mm) 2.95 (75)/2.36 (60) Oil capacity, qt (l) 1.2 (1.1) Handlebar adjustment Variable Position Transmission type Push..
$2,040.00
Applications Ideal for medium to small service and repair jobs when cuttingconcrete or asphalt indoors. An electric flat saw perfect for use when no exhaust emissions are permitted. Benefits Slip-on blade guard has an auto-latch to clamp the guard securely to the saw. It also has a wide, tapered guard spade and a replaceable blade guard hinge to aid in removing and installing the blade guard. Lift bail is standard for easy loading and unloading. Box frame is the most rigid available and provides long life and less stress on the bladeshaft and bearings. Dual arbors allow the blade to be mounted on either end of the bladeshaft for right or left cutting. Specifications FS 3500 26" E FS 3500 30" E Item No. 965151828 965151829 Maximum blade diameter, in (mm) 26 (660) 30 (762) Maximum depth of cut, in (mm) 10-1/2 (267) 12 (305) Average bladeshaft, rpm 1750 1600 Weight, lbs (kg) 1,465 (656) 1,486 (666) Power source Lincoln Maximum power, hp (kW)* 30 (22) Arbor size, in (mm) 1 (25) Blade flanges, in (mm) 5 (127), 6 (154) 30" Bladeshaft diameter, in (mm) 1-7/16 (36.5) Voltage, V 480 Phase 3 Cycle 60 Amp rating (full load) 37 Axle front/rear, in (mm) 1 (25.4) Wheels front, in (mm) 6 x 2 x 1 (152 x 51 x 25.4) Wheels rear, in (mm) 8 x 2 x 1 (203 x 51 x 25.4) Handlebar adjustment Multi-position Blade guard type Slip-on Maximum weight uncrated, lbs (kg) 1,160 (526) Recommended generator size, kW 65 kW..
$22,994.00
Applications Ideal for repair and removal of driveways and sidewalks. Benefits Improved drive system reduces load on engine. Updated quick disconnect blade flanges assist when blade is pinched in a cut. Lift bail is standard for easy loading and unloading. Dual arbors allow the blade to be mounted on either end of the bladeshaft for right or left cutting. Hydraulic raise and lower system reduces operator fatigue and increases production. Specifications FS 3500 20" G FS 3500 26" G FS 3500 30" G Item No. 967673701 967673702 967673703 Maximum blade diameter, in (mm) 20 (508) 26 (660) 30 (762) Maximum depth of cut, in (mm) 7-5/8 (196) 10-1/2 (267) 12-3/8 (311) Average bladeshaft, rpm 2,650 1,860 1,860 Weight, lbs (kg) 922 (418.2) 933 (423.2) 943 (427.7) Power source Kohler CH1000 Maximum power, hp (kW)* 37 (27.5) Arbor size, in (mm) 1 (25) Bladeshaft diamter, in (mm) 1-7/16 (36.5) Cylinders/cycle 2/4 Fuel capacity, gal (l) 6 (28) Air filter Heavy canister Starter Electric Engine cooling Air Axle front/rear, in (mm) 1 (25.4) Wheels front, in (mm) 6 x 2 x 1 (152 x 51 x 25.4) Wheels rear, in (mm) 8 x 2 x 1 (203 x 51 x 25.4) Blade guard type Slip-on Number of belts 25 Rib Poly V Belt Blade depth control Electrohydraulic pump Dimensions uncrated, pointer and blade guard up, handles in, in (mm) L x W x H 56 x 32 x 45 (1,420 x 800 x 1,135) Displacement, cu in (l) 61 (1) Bore/stroke, in (mm) 3.5/3.1 (89/79) Oil capacity, qt (l) 2.9 (2.7) Handlebar adjustment Two position Transmission type Hydrostatic drive Transmission speeds, fpm 0-150..
$23,999.00
Applications A great rental saw, perfect for smaller jobs such as sidewalks, driveways and city streets. Benefits Productive push saw with excellent weight distribution and stability, which enhances maneuverability. Adjustable, low-vibration handlebar increases operator comfort. Patented gas-assisted raise/lower system reduces force required to raise and lower the blade in and out of the cut. It is easy to transport and lift due to its small size and weight. Optimum power transmission to the blade due to the Poly V-belt, which increases production. Large integrated water tank is standard. Specifications Maximum blade diameter, in (mm) 20 (508) Maximum depth of cut, in (mm) 7-5/8 (193) Average bladeshaft, rpm 2,800 Blade flanges, in (mm) 4-1/2 (114) Maximum weight crated, lbs (kg) 287 (130) Maximum weight uncrated, lbs (kg) 219 (99) Power source Honda GX390 Maximum power, hp (kW)* 11 (8) Arbor size, in (mm) 1 (25) Bladeshaft diameter, in (mm) 1-3/16 (21.5) Cylinders/cycle 1/4 Fuel capacity, gal (1) 1.6 (6.1) Air filter Dry type dual dual element cyclone Starter Recoil Engine cooling Air Axle front/rear, in (mm) 3/4 (19) Wheels front, in (mm) 5 x 1-1/2 x 5/8 (125 x 38 x 16) Wheels rear, in (mm) 8 x 1-1/2 x 5/8 (203 x 38 x 16) Blade guard type Bolt On Number of belts 12 rib poly v belt Blade depth control Spring assist screw feed Dimensions uncrated, pointer and blade guard up, handles in, in (mm) L x W x H 42 x 20 x 30 (1,067 x 508 x 991) Displacement, cu in (l) 23.7 (389) 3.7 Bore/stroke, in (mm) 3.5 (88)/2.5 (64) Oil capacity, qt (l) 1.2 (1.3) Handlebar adjustment Multiple position Transmission type Push..
$2,445.00
  Applications Handles medium to small service work and repair jobs in concrete or asphalt. Perfect for rental. Benefits A push saw with a clear focus on ergonomics, which reduces operator fatigue. Patented engine and bladeshaft mounting system reduces vibration for improved cutting performance. Patented IntelliSeal bladeshaft system allows for a minimum of 250 maintenance-free hours and eliminates daily greasing of bearings. The spring-assist screw feed adjustment feature reduces the force required to raise and lower the blade in and out of the cut. Compact and easy to transport Specifications Maximum blade diameter, in (mm) 20 (508) Maximum depth of cut, in (mm) 7-5/8 (196) Average bladeshaft, rpm 2,620 Blade flanges, in (mm) 4-1/2 (114) Maximum weight crated, lbs (kg) 379 (172) Maximum weight uncrated, lbs (kg) 306 (139) Power source Honda GX390 Maximum power, hp (kW)* 11 (8) Arbor size, in (mm) 1 (25) Bladeshaft diameter, in (mm) 1-3/16 (30) Cylinders/cycle 1/4 Fuel capacity, gal (1) 1.6 (6.1) Air filter Dry type dual element cyclone Starter Recoil Engine cooling Air Axle front/rear, in (mm) 3/4 (19) Wheels front, in (mm) Wheels rear, in (mm) 4 x 1-1/2 x 5/8 (114 x 38 x 16) 8 x 2 x 5/8 (203 x 51 x 16) Blade guard type Slip-on with bolt Number of belts 12 rib poly v belt Blade depth control Spring assist screw feed Dimensions uncrated, pointer and blade guard up, handles in, in (mm) L x W x H 59 x 25-3/4 x 41 (1,499 x 654 x 1,041) Displacement, cu in (l) 23.7 (389) Bore/stroke, in (mm) 3.5 (88)/2.5 (64) Oil capacity, qt (l) 1.2 (1.3) Handlebar adjustment Variable Position Transmission type Push..
$4,244.79
Applications Perfect for jobs such as airports, highways, service work, and other applications where production is a priority. Mid- to small-size jobs that require high production rates. Benefits Tier 4 compliant engine meets current EPA regulations. Blade diameters up to 36" provides maximum cutting depth of 15". Optional E-track system with an integrated reset function in the display making it easier to produce a straight cut. Power transmission system transmits more power to the bladeshaft with optimum torque. Patented IntelliSeal bladeshaft system allows a minimum of 500 maintenance-Specifications Specifications FS Models FS 5000 D 14" Item No. 967207301 Item No. (E-Tracking) 967207302 Item No. (E-tracking, Blade clutch) 967207303 Maximum blade diameter, in (mm) 14 (350) Maximum depth of cut, in (mm) 4-3/4 (121) Average bladeshaft, rpm 3,197 Blade flanges, in (mm) 4-1/2 (114) Maximum weight crated, lbs (kg) 1,761 (799) Maximum weight uncrated, lbs (kg) 1,656 (751) Engine specifications Yanmar 4TNV88C-DHQ Maximum power, hp (kW)* 48 (35.5) Power at bladeshaft, hp (kW) 42 (31) Arbor size, in (mm) 1 (25), single drive pin Bladeshaft diameter, in (mm) 2 (51) Cylinders/cycle 4/4 Fuel capacity, gal (l) 7.8 (29.5) Air filter Dual Element Radial Seal with rain hood Starter Electric Engine cooling Liquid/air Axle front/rear, in (mm) 1 (25) Wheels front, in (mm) 6 x 2 (152 x 51) Wheels rear, in (mm) 10 x 3 (254 x 76) Blade guard type Slip-on Number of belts 12 Blade depth control Electrohydraulic pump Dimensions uncrated, pointer and blade guard up, handles in, in (mm) L x W x H 56 x 3-1/4 x 51(1,422 x 845 x 1,295) Displacement, cu in (l) 133 (2.19) Bore/stroke, in (mm) 3.5/3.55 (88/90) Oil capacity, qt (l) 7.8 (7.4) Handlebar adjustment Variable Position Transmission type Balanced dual motor hydrostatic drive Transmission speeds, fpm 0-300 Electric tracking (optional) Electric switch operated..
$32,204.00 $41,460.00
Showing 1 to 0 of 412 (0 Pages)