-75x75w.jpg "American Pneumatic Tool")
Pre-Order
Multiquip MLT Light Tower
$7,125.00
California Proposition 69 Warning
Warning: This product contains chemicals known to the State of California to cause cancer, birth defects or other reproductive harm.
The base unit for the MLT-series light towers. Offered without a power source for contractors who already own a Multiquip DA7000 generator or SDW225SS welder. It can also be used to provide lighting for indoor applications by connecting directly to an alternate power source.
- Can be used with a Multiquip DA7000SS generator or SDW225SS welder
- Withstands winds up to 72 mph (115 kph) with, and 55 mph (88 kph) without, an approved generator
- Ballasts and light switches are protected by inside a waterproof box
- Mast extends to 30 feet (9 meters) and can be rotated 360 degrees
- Four 1,000-watt metal halide floodlights illuminates an area of 5 to 7 acres (3.2 hectares)
Sound Level @ 23ft 0 dBA Fuel Tank Capacity 0 gal 0 L Ground Clearance 6.5 in 165 cm Standard Hitch Type 29228 — 2" Ball Adjustable Optional Hitch Types 29369 — 3" Pintle Floodlights 4 — 1000 watt Metal Halide Light Coverage 5 to 7 acres acres 2 to 2.8 hectares hectares Lumens 440,000 Lamp Termination 4 x 3-pin QD Plug Max. Tower Height 32 ft 9.75 m Tower Support Points 4 Wind Stability
w/ Genset72 mph 116 kph Wind Stability
w/o Genset45 mph 72 kph Winch Capacity 1,500 lb 680.4 kg Winch Wire Size 3/16 in Max. Generator Output W Cont. Generator Output W Voltage V Amperage A Receptacles Max. Amperage A Current Range W Voltage Range V Duty Cycle @ 200A
| General | |
| Application | Commercial |
| Inventory | |
| Condition | New |
