Diamond Products 4246070 M-1 Angle Anchor Stand Only

California Proposition 65 Warning

WARNING: This product can expose you to chemicals known to the State of California to cause cancer, birth defects, or other reproductive harm. For more information, go to www.P65Warnings.ca.gov.

For Use with Milwaukee Motors. 45" mast

2-1/2” square column (mast) with black oxidized finish
6” wheels for easy mobility
Up to 14” bit capacity with one spacer block
Slide handle allows for drilling in tight areas
Ceiling jack helps keep the rig in place as a backup for anchoring or vacuuming the base down (used with a brace piece-2 x 4 or other material)

SINGLE CYLINDER REPAIR

If you have any questions about products. Please email us at info@singlecylinderstore.com or call us at 877-558-1112

General
Application	Commercial
Inventory
Condition	New

Same Brand
Same Category

Diamond Products CC1000 Joint Cutting Saw

Call/Text 510-761-1112 for info

The Ultra Lightweight Saw That Cuts Decorative and Joint Cuts in Concrete.Features Power transference to blade drive via 2 molded notc..

$0.00

Diamond Products CC1000T 1-1/2 hp Super Duty Tile Saw, 5800572PKG

-16 %

Extra Wide Tile Saw for Large Tile Cutting JobsFeatures 3-3/4” cutting depth 1-1/2 HP, 15amp, 115V high torque motor Rip cut up to..

$1,498.50 $1,781.00

Diamond Products CC1111HUXL-14 Joint Cutting Mini Saw, 5801020

Features Heavy duty adjustable operator handles Easy to maneuver push drive Up-cut or down-cut available 1” arbor size with drive pi..

$3,600.72

Diamond Products CC1211HXL-14 Portable Saw, 14", Honda GX390, 5801093

Diamond Products CC1211HXL-14 Portable Saw, 14", Honda GX390, 5801093

-5 %

Features Heavy duty design, but light weight enough for two people to lift Cyclone air filter (Honda® models) Easy to read built..

$3,152.00 $3,300.92

Diamond Products CC125BXL-EE6 First-Cut Saw, Baldor Electric, 5801357,

-25 %

Features Maximum cutting depth of 1-3/16” Reliable skid plate system for green concrete Heavy duty design but light weight enough for ..

$3,474.75 $4,633.00

Diamond Products CC1300XL Electric Concrete Saw

Diamond Products CC1300XL Electric Concrete Saw

Call/Text 510-761-1112 for info

Diamond Products CC1300XL Gasoline Concrete SawDiamond Products CC1300XL Hydraulic Concrete Saw Saw Model # Blad..

$0.00

Diamond Products CC1300XL Gasoline Concrete Saw

Diamond Products CC1300XL Gasoline Concrete Saw

Call/Text 510-761-1112 for info

Diamond Products CC1300XL Electric Concrete SawDiamond Products CC1300XL Hydraulic Concrete Saw Saw Model # Blad..

$0.00

Diamond Products CC1313HYXL-20 20" Walk Behind Hydraulic Saw, Danfoss 25 GPM, 5800724C

Diamond Products CC1300XL Gasoline Concrete SawDiamond Products CC1300XL Electric Concrete Saw Saw Model # Blade..

$6,307.70

Diamond Products CC1507E3-20 Modular Saw, 5801500

For more information options please call us 18775581112Features Electric powered for areas with limited access and where exhaust ..

$10,205.16

Diamond Products CC1800XL Electric Medium Walk Behind Saw

Diamond Products CC1800XL Electric Medium Walk Behind Saw

Call/Text 510-761-1112 for info

Diamond Products CC1800XL Gas Medium Walk Behind SawDiamond Products CC1800XL Hydraulic Medium Walk Behind Saw Model # ..

$0.00

Diamond Products CC1800XL Gas Medium Walk Behind Saw

Diamond Products CC1800XL Gas Medium Walk Behind Saw

Call/Text 510-761-1112 for info

Diamond Products CC1800XL Electric Medium Walk Behind SawDiamond Products CC1800XL Hydraulic Medium Walk Behind Saw Model # ..

$0.00

Diamond Products CC1823BVXLP-14S 14” Propane Walk Behind Saw, 5801426

Features Briggs Vanguard engine converted to propane vapor draw Horizonally-mounted 20 lbs. propane tank Self-propelled travel for eas..

$12,032.76

Diamond Products CC190PRO-EE First-Cut Saw 5801128

Diamond Products CC190PRO-EE First-Cut Saw 5801128

-20 %

For more information options please call us 18775581112Features Capable of .110” to .250” thick blades Self propelled drive Raise ..

$15,478.50 $19,305.00

Diamond Products CC300M 2 HP-115 Volt 15 amp Electric Masonry Saw

Diamond Products CC300M 2 HP-115 Volt 15 amp Electric Masonry Saw

-23 %

14" Blade Capacity.Features The most cost-efficient way to cut masonry Cuts 5” deep with 14” blade Powerful 2 HP electric motor ..

$1,159.00 $1,509.00

Diamond Products CC500MXL2 Masonry Saw

Call/Text 510-761-1112 for info

This item is backordered until Jan-2023Versatile and PowerfulFeatures Stay level blade guard Removable cutting head Leg kit st..

$0.00

Diamond Products CC600T 3/4 HP Electric Tile Saw w/7" Blade Guard, 5800558PKG

-20 %

Small, Portable Saw for General Tile Cutting7" Capacity (5/8" arbor)Features 1-3/4” maximum cutting depth Easy to clean water tr..

$735.00 $923.00

Diamond Products CC800M Electric Block Saw

Diamond Products CC800M Gasoline Block SawRugged Block Saw For Large ApplicationsFeatures24” blade cuts a 10” block in a single pass ..

$0.00

Diamond Products CC800M Gasoline Block Saw

Call/Text 510-761-1112 for info

Diamond Products CC800M Electric Block SawRugged Block Saw For Large ApplicationsFeatures24” blade cuts a 10” block in a single pass ..

$6,491.00

Diamond Products CC900TE 1-1/2 hp 10" Electric Economy Tile Saw, 5800559PKG

-20 %

Large Tile Saw at an Economical CostFeatures 3-3/4” cutting depth 1-1/2 HP, 15amp, 115V high torque motor Rip cut up to 20”, diago..

$1,295.00 $1,617.00

Diamond Products CC912TS Electric Tile Saw with 9" Blade Capacity, 5801608PKG

Diamond Products CC912TS Electric Tile Saw with 9" Blade Capacity, 5801608PKG

-19 %

Light-weight and compact for high performance cutting.9" blade capacity with 1" arbor.Features Heavy duty table with measuring gui..

$616.00 $765.00

Diamond Products CCE0911H-20 Portable Saw, Honda GX390, 20”, 5801613

FeaturesHeavy duty design, but light-weight enough for two people to lift Cyclone air filter Easy to read built-in depth indicator Precis..

$3,097.02

Diamond Products CP305 Handheld Polisher, 5801328

Diamond Products CP305 Handheld Polisher, 5801328

-14 %

Features Uses three 5” diamond polishing pads and/or diamond grinding discs Planetary, gear driven system Powered by a heavy duty ..

$4,390.00 $5,107.00

Diamond Products CPG102E1 Single Head Floor Grinder Baldor® 2 HP-1PH, 115V or 230V, 5800727

-4 %

Features Remote throttle 2” dust port opening Single grease point Steel box frame Adjustable operator handles Lifting handle..

$4,796.00 $4,981.00

Diamond Products CPG110H Single Head Floor Grinder Honda® GXV390, 5800726

-6 % Pre-Order

FeaturesRemote throttle 2” dust port opening Single grease point Steel box frame Adjustable operator handles Lifting handles Adjust..

$5,548.00 $5,920.00

Diamond Products CPG175E1 Single Head Floor Grinder Baldor® 7.5 HP-1PH, 230V, 5800828

-6 %

Features Remote throttle 2” dust port opening Single grease point Steel box frame Adjustable operator handles Lifting handle..

$6,998.00 $7,468.00

Diamond Products 4220030 M-5 Combination Angle Drill Stand 40” Mast

Diamond Products 4220030 M-5 Combination Angle Drill Stand 40” Mast

-15 %

Quick release motor mount 4-spoke sliding handle (can be used on right or left) Positive carriage lock 2-1/2” x 3” extruded aluminum light weigh..

$1,715.00 $2,011.00

Diamond Products 4220031 M-5 Combination Angle Stand 60” Mast

Diamond Products 4220031 M-5 Combination Angle Stand 60” Mast

-15 %

Quick release motor mount 4-spoke sliding handle (can be used on right or left) Positive carriage lock 2-1/2” x 3” extruded aluminum light weigh..

$1,840.00 $2,169.00

Diamond Products 4220032 M-5 Combination Angle Drill Stand 50” Mast

Diamond Products 4220032 M-5 Combination Angle Drill Stand 50” Mast

-15 %

Quick release motor mount 4-spoke sliding handle (can be used on right or left) Positive carriage lock 2-1/2” x 3” extruded aluminum light weigh..

$1,809.00 $2,124.00

Diamond Products 4220070 M-5 PRO Combo Drill Stand Only

-13 %

4-spoke handle (can be used on right or left) on combo rig Positive carriage lock and friction lock Extruded aluminum light weight column (mast) t..

$2,928.00 $3,384.00

Diamond Products 4220071 M-5 PRO Anchor Drill Stand Only

-14 %

M-5 PRO Anchor Drill Stand Only (39" LONG MAST) SINGLE CYLINDER REPAIRIf you have any questions about any pro..

$2,998.00 $3,495.00

Diamond Products 4220080 M-5 Anchor Drill Stand 40” Mast

-15 %

Quick release motor mount 4-spoke sliding handle (can be used on right or left) Positive carriage lock 2-1/2” x 3” extruded aluminum light weigh..

$1,371.00 $1,616.00

Diamond Products 4220081 M-5 Anchor Stand 60” Mast

-15 %

Quick release motor mount 4-spoke sliding handle (can be used on right or left) Positive carriage lock 2-1/2” x 3” extruded aluminum light weigh..

$1,585.00 $1,863.00

Diamond Products 4220082 M-5 Anchor Drill Stand 50” Mast

-15 %

Quick release motor mount 4-spoke sliding handle (can be used on right or left) Positive carriage lock 2-1/2” x 3” extruded aluminum light weigh..

$1,475.00 $1,740.00

Diamond Products 4240020 M-4 Combination Angle Drill Stand 30" Mast for Weka Motor

-15 %

Great for the general contractor (basic drilling) or plumber (hand-held drilling), electrical or mechanical contractor Reversible slide handle (f..

$1,005.00 $1,184.00

Diamond Products 4240022 M-4 Combination Drill Stand 42" mast for Weka Motor

-15 %

Great for the general contractor (basic drilling) or plumber (hand-held drilling), electrical or mechanical contractor Reversible slide handle (for ..

$1,095.00 $1,286.00

Diamond Products 4240024 M-4 Anchor Stand 30" Mast for Weka Motor

-15 %

Great for the general contractor (basic drilling) or plumber (hand-held drilling), electrical or mechanical contractor Reversible slide handle (for ..

$825.00 $970.00

Diamond Products 4240025 M-4 Combination Angle Drill Stand 30" Mast For Milwaukee Motor

-15 %

Great for the general contractor (basic drilling) or plumber (hand-held drilling), electrical or mechanical contractor Reversible slide handle (f..

$1,095.00 $1,286.00

Diamond Products 4240026 M-4 Combination Drill Stand 42" mast For Milwaukee Motor

-15 %

Great for the general contractor (basic drilling) or plumber (hand-held drilling), electrical or mechanical contractor Reversible slide handle (for ..

$1,095.00 $1,286.00