Diamond Products 4220081 M-5 Anchor Stand 60” Mast

California Proposition 69 Warning

Warning: This product contains chemicals known to the State of California to cause cancer, birth defects or other reproductive harm.

Quick release motor mount
4-spoke sliding handle (can be used on right or left)
Positive carriage lock
2-1/2” x 3” extruded aluminum light weight column (mast) that is hard anodized to prevent wear
Top carrying handle (ceiling jack available)
Large bit capacity in a smaller rig system
Allows for mounting hydraulic motors
Angle stand to drill up to 45°
Double column support for increased stability
Easily adjustable slide bearings

SINGLE CYLINDER REPAIR

If you have any questions about products. Please email us at info@singlecylinderstore.com or call us at 877-558-1112

General
Application	Commercial
Inventory
Condition	New

Same Brand
Same Category

Diamond Products CC1000 Joint Cutting Saw

Call/Text 510-761-1112 for info

The Ultra Lightweight Saw That Cuts Decorative and Joint Cuts in Concrete.Features Power transference to blade drive via 2 molded notc..

$0.00

Diamond Products CC1000T 1-1/2 hp Super Duty Tile Saw, 5800572PKG

-21 %

Extra Wide Tile Saw for Large Tile Cutting JobsFeatures 3-3/4” cutting depth 1-1/2 HP, 15amp, 115V high torque motor Rip cut up to..

$1,398.50 $1,781.00

Diamond Products CC1111HUXL-14 Joint Cutting Mini Saw, 5801020

-24 %

Features Heavy duty adjustable operator handles Easy to maneuver push drive Up-cut or down-cut available 1” arbor size with drive pi..

$3,008.00 $3,973.00

Diamond Products CC1211HXL-14 Portable Saw, 14", Honda GX390, 5801093

Diamond Products CC1211HXL-14 Portable Saw, 14", Honda GX390, 5801093

-17 %

Features Heavy duty design, but light weight enough for two people to lift Cyclone air filter (Honda® models) Easy to read built..

$3,152.00 $3,798.00

Diamond Products CC125BXL-EE6 First-Cut Saw, Baldor Electric, 5801357

-25 %

Features Maximum cutting depth of 1-3/16” Reliable skid plate system for green concrete Heavy duty design but light weight enough for ..

$3,474.75 $4,633.00

Diamond Products CC1300XL Electric Concrete Saw

Diamond Products CC1300XL Electric Concrete Saw

Call/Text 510-761-1112 for info

Diamond Products CC1300XL Gasoline Concrete SawDiamond Products CC1300XL Hydraulic Concrete Saw Saw Model # Blad..

$0.00

Diamond Products CC1300XL Gasoline Concrete Saw

Diamond Products CC1300XL Gasoline Concrete Saw

Call/Text 510-761-1112 for info

Diamond Products CC1300XL Electric Concrete SawDiamond Products CC1300XL Hydraulic Concrete Saw Saw Model # Blad..

$0.00

Diamond Products CC1313HYXL-20 20" Walk Behind Hydraulic Saw, Danfoss 25 GPM, 5800724C

Diamond Products CC1313HYXL-20 20" Walk Behind Hydraulic Saw, Danfoss 25 GPM, 5800724C

-18 %

Diamond Products CC1300XL Gasoline Concrete SawDiamond Products CC1300XL Electric Concrete Saw Saw Model # Blade..

$5,845.00 $7,131.00

Diamond Products CC1507E3-20 Modular Saw, 5801500

Diamond Products CC1507E3-20 Modular Saw, 5801500

-20 %

For more information options please call us 18775581112Features Electric powered for areas with limited access and where exhaust ..

$9,185.00 $11,482.00

Diamond Products CC1800XL Electric Medium Walk Behind Saw

Diamond Products CC1800XL Electric Medium Walk Behind Saw

Call/Text 510-761-1112 for info

Diamond Products CC1800XL Gas Medium Walk Behind SawDiamond Products CC1800XL Hydraulic Medium Walk Behind Saw Model # ..

$0.00

Diamond Products CC1800XL Gas Medium Walk Behind Saw

Diamond Products CC1800XL Gas Medium Walk Behind Saw

Call/Text 510-761-1112 for info

Diamond Products CC1800XL Electric Medium Walk Behind SawDiamond Products CC1800XL Hydraulic Medium Walk Behind Saw Model # ..

$0.00

Diamond Products CC1823BVXLP-14S 14” Propane Walk Behind Saw, 5801426

Diamond Products CC1823BVXLP-14S 14” Propane Walk Behind Saw, 5801426

-20 %

Features Briggs Vanguard engine converted to propane vapor draw Horizonally-mounted 20 lbs. propane tank Self-propelled travel for eas..

$10,629.00 $13,287.00

Diamond Products CC190PRO-EE First-Cut Saw 5801128

Diamond Products CC190PRO-EE First-Cut Saw 5801128

-20 %

For more information options please call us 18775581112Features Capable of .110” to .250” thick blades Self propelled drive Raise ..

$15,478.50 $19,305.00

Diamond Products CC300M 2 HP-115 Volt 15 amp Electric Masonry Saw

Diamond Products CC300M 2 HP-115 Volt 15 amp Electric Masonry Saw

-23 %

14" Blade Capacity.Features The most cost-efficient way to cut masonry Cuts 5” deep with 14” blade Powerful 2 HP electric motor ..

$1,159.00 $1,509.00

Diamond Products CC500MXL2 Masonry Saw

Call/Text 510-761-1112 for info

This item is backordered until Jan-2023Versatile and PowerfulFeatures Stay level blade guard Removable cutting head Leg kit st..

$0.00

Diamond Products CC600T 3/4 HP Electric Tile Saw w/7" Blade Guard, 5800558PKG

-20 %

Small, Portable Saw for General Tile Cutting7" Capacity (5/8" arbor)Features 1-3/4” maximum cutting depth Easy to clean water tr..

$735.00 $923.00

Diamond Products CC800M Electric Block Saw

Diamond Products CC800M Gasoline Block SawRugged Block Saw For Large ApplicationsFeatures24” blade cuts a 10” block in a single pass ..

$0.00

Diamond Products CC800M Gasoline Block Saw

Call/Text 510-761-1112 for info

Diamond Products CC800M Electric Block SawRugged Block Saw For Large ApplicationsFeatures24” blade cuts a 10” block in a single pass ..

$6,491.00

Diamond Products CC900TE 1-1/2 hp 10" Electric Economy Tile Saw, 5800559PKG

-20 %

Large Tile Saw at an Economical CostFeatures 3-3/4” cutting depth 1-1/2 HP, 15amp, 115V high torque motor Rip cut up to 20”, diago..

$1,295.00 $1,617.00

Diamond Products CC912TS Electric Tile Saw with 9" Blade Capacity, 5801608PKG

Diamond Products CC912TS Electric Tile Saw with 9" Blade Capacity, 5801608PKG

-19 %

Light-weight and compact for high performance cutting.9" blade capacity with 1" arbor.Features Heavy duty table with measuring gui..

$616.00 $765.00

Diamond Products CCE0911H-20 Portable Saw, Honda GX390, 20”, 5801613

Diamond Products CCE0911H-20 Portable Saw, Honda GX390, 20”, 5801613

-10 %

FeaturesHeavy duty design, but light-weight enough for two people to lift Cyclone air filter Easy to read built-in depth indicator Precis..

$2,695.00 $3,007.00

Diamond Products CP305 Handheld Polisher, 5801328

Diamond Products CP305 Handheld Polisher, 5801328

-14 %

Features Uses three 5” diamond polishing pads and/or diamond grinding discs Planetary, gear driven system Powered by a heavy duty ..

$4,390.00 $5,107.00

Diamond Products CPG102E1 Single Head Floor Grinder Baldor® 2 HP-1PH, 115V or 230V, 5800727

-4 %

Features Remote throttle 2” dust port opening Single grease point Steel box frame Adjustable operator handles Lifting handle..

$4,796.00 $4,981.00

Diamond Products CPG110H Single Head Floor Grinder Honda® GXV390, 5800726

-6 % Pre-Order

FeaturesRemote throttle 2” dust port opening Single grease point Steel box frame Adjustable operator handles Lifting handles Adjust..

$5,548.00 $5,920.00

Diamond Products CPG175E1 Single Head Floor Grinder Baldor® 7.5 HP-1PH, 230V, 5800828

-6 %

Features Remote throttle 2” dust port opening Single grease point Steel box frame Adjustable operator handles Lifting handle..

$6,998.00 $7,468.00

Diamond Products 4220030 M-5 Combination Angle Drill Stand 40” Mast

Diamond Products 4220030 M-5 Combination Angle Drill Stand 40” Mast

-15 %

Quick release motor mount 4-spoke sliding handle (can be used on right or left) Positive carriage lock 2-1/2” x 3” extruded aluminum light weigh..

$1,715.00 $2,011.00

Diamond Products 4220031 M-5 Combination Angle Stand 60” Mast

Diamond Products 4220031 M-5 Combination Angle Stand 60” Mast

-15 %

Quick release motor mount 4-spoke sliding handle (can be used on right or left) Positive carriage lock 2-1/2” x 3” extruded aluminum light weigh..

$1,840.00 $2,169.00

Diamond Products 4220032 M-5 Combination Angle Drill Stand 50” Mast

Diamond Products 4220032 M-5 Combination Angle Drill Stand 50” Mast

-15 %

Quick release motor mount 4-spoke sliding handle (can be used on right or left) Positive carriage lock 2-1/2” x 3” extruded aluminum light weigh..

$1,809.00 $2,124.00

Diamond Products 4220070 M-5 PRO Combo Drill Stand Only

-13 %

4-spoke handle (can be used on right or left) on combo rig Positive carriage lock and friction lock Extruded aluminum light weight column (mast) t..

$2,928.00 $3,384.00

Diamond Products 4220071 M-5 PRO Anchor Drill Stand Only

-14 %

M-5 PRO Anchor Drill Stand Only (39" LONG MAST) SINGLE CYLINDER REPAIRIf you have any questions about any pro..

$2,998.00 $3,495.00

Diamond Products 4220080 M-5 Anchor Drill Stand 40” Mast

-15 %

Quick release motor mount 4-spoke sliding handle (can be used on right or left) Positive carriage lock 2-1/2” x 3” extruded aluminum light weigh..

$1,371.00 $1,616.00

Diamond Products 4220082 M-5 Anchor Drill Stand 50” Mast

-15 %

Quick release motor mount 4-spoke sliding handle (can be used on right or left) Positive carriage lock 2-1/2” x 3” extruded aluminum light weigh..

$1,475.00 $1,740.00

Diamond Products 4240020 M-4 Combination Angle Drill Stand 30" Mast for Weka Motor

-15 %

Great for the general contractor (basic drilling) or plumber (hand-held drilling), electrical or mechanical contractor Reversible slide handle (f..

$1,005.00 $1,184.00

Diamond Products 4240022 M-4 Combination Drill Stand 42" mast for Weka Motor

-15 %

Great for the general contractor (basic drilling) or plumber (hand-held drilling), electrical or mechanical contractor Reversible slide handle (for ..

$1,095.00 $1,286.00

Diamond Products 4240024 M-4 Anchor Stand 30" Mast for Weka Motor

-15 %

Great for the general contractor (basic drilling) or plumber (hand-held drilling), electrical or mechanical contractor Reversible slide handle (for ..

$825.00 $970.00

Diamond Products 4240025 M-4 Combination Angle Drill Stand 30" Mast For Milwaukee Motor

-15 %

Great for the general contractor (basic drilling) or plumber (hand-held drilling), electrical or mechanical contractor Reversible slide handle (f..

$1,095.00 $1,286.00

Diamond Products 4240026 M-4 Combination Drill Stand 42" mast For Milwaukee Motor

-15 %

Great for the general contractor (basic drilling) or plumber (hand-held drilling), electrical or mechanical contractor Reversible slide handle (for ..

$1,095.00 $1,286.00

Diamond Products 4240027 M-4 Anchor Drill Stand 30" Mast For Milwaukee Motor

-15 %

Great for the general contractor (basic drilling) or plumber (hand-held drilling), electrical or mechanical contractor Reversible slide handle (for ..

$825.00 $970.00

Diamond Products 4240028 M-4 Swivel Combo Stand 30" Mast for Weka Motor

-15 %

Great for the general contractor (basic drilling) or plumber (hand-held drilling), electrical or mechanical contractor Swivel Mast Can be rotated..

$989.00 $1,163.00

Diamond Products 4240029 M-4 Swivel Combo Drill Stand 30" Mast For Milwaukee Motor

-15 %

Great for the general contractor (basic drilling) or plumber (hand-held drilling), electrical or mechanical contractor Swivel Mast Can be rotated..

$970.00 $1,139.00

Diamond Products 4241055 M-2 Combination Drill Stand Only

-15 %

M-2 Combination Drill Stand Only SINGLE CYLINDER REPAIRIf you have any questions about products. Please email us ..

$1,460.00 $1,718.00

Diamond Products 4241056 M-2 Angle Combination Stand Only

-15 %

Heavy duty rig for larger jobs and the professional driller 2-7/8” precision made, chrome plated square column (mast) Use with vacuum pump for qui..

$1,860.00 $2,189.00

Diamond Products 4241058 M-2 Combination Stand w/roller carriage

-15 %

M-2 Combination Drill Stand with roller carriage SINGLE CYLINDER REPAIRIf you have any questions about products. ..

$1,730.00 $2,034.00

Diamond Products 4241064 M-2 Large Base Anchor Stand Only

-15 %

Heavy duty rig for larger jobs and the professional driller Larger Base provides more stability 2-7/8” precision made, chrome plated square column..

$1,460.00 $1,718.00

Diamond Products 4241100 M-2 Anchor Drill Stand Only

-15 %

Heavy duty rig for larger jobs and the professional driller 2-7/8” precision made, chrome plated square column (mast) 6” wheels for easy mobility ..

$1,285.00 $1,513.00

Diamond Products 4241110 M-2 Angle Drill Anchor Stand Only

-15 %

Heavy duty rig for larger jobs and the professional driller 2-7/8” precision made, chrome plated square column (mast) 6” wheels for easy mobility ..

$1,680.00 $1,977.00

Diamond Products 4241169 M-2 Angle Forward/Back Stand

Diamond Products 4241169 M-2 Angle Forward/Back Stand

-9 %

M-2 Angle Forward/Back Stand angle pivot base, M-2 mast, and carriage.FeaturesWhen drilling in tight, limited space the pivot stand is..

$2,688.00 $2,958.00

Diamond Products 4241170 M-2 Angle Side/Side Stand

Diamond Products 4241170 M-2 Angle Side/Side Stand

-9 %

M-2 Angle Side/Side Stand Includes angle pivot base, M-2 mast, and carriage.FeaturesWhen drilling in tight, limited space the pivot stand i..

$2,584.00 $2,842.00

Diamond Products 4243053 M-2 Combination Drill Stand for Weka, CB733 & CB744

-15 %

Combination Drill Stand for Weka, CB733 and CB744 SINGLE CYLINDER REPAIRIf you have any questions about products...

$1,432.00 $1,685.00

Diamond Products 4243054 M-2 Anchor Drill Stand for Weka, CB733 & CB744

-15 %

Heavy duty rig for larger jobs and the professional driller 2-7/8” precision made, chrome plated square column (mast) 6” wheels for easy mobility ..

$1,261.00 $1,484.00