General Equipment Company SG7 Grinder, 2300W, 115Vac

California Proposition 65 Warning

WARNING: This product can expose you to chemicals known to the State of California to cause cancer, birth defects, or other reproductive harm. For more information, go to www.P65Warnings.ca.gov.

For maneuverability and sure-handedness, the SG7 SurfacePro Edge Grinder from General Equipment is ready for action. Intended for smaller area job applications, is a highly productive solution to grinding or leveling concrete and asphalt surfaces found in both commercial and DIY projects. The walk-behind design keeps operators off their knees reducing stress and strain while increasing overall productivity and comfort over hand-held grinders.

Specifications

Operating Environment: Non-hazardous type locations
Power: 2.3 Kw, 115VAC, 60 HZ, 15.0 amperes
Nominal Cup Rotation Speed: 3400.0 RPM
Dimensions (L x W x H): 36.7 x 10.4 x 36.8 inches (932.2 x 264.2 x 934.7 mm)
Weight: 30.0 lbs (17.7 kg), less grinding cup wheel

SINGLE CYLINDER REPAIR

If you have any questions about any products. Please email us at info@singlecylinderstore.com or call us at 877-558-1112.

General
Power source	Gas
Application	Commercial
Inventory
Condition	New

Same Brand
Same Category

General Equipment 102-1000 Standard moil point, 1-1/8 inch hexagon shank

It just might be the most useful hand operated construction tool to come along in the last decade. Produces an incredible 1450 ft. lbs. of energy per ..

$55.39

General Equipment 102-1100 Standard narrow chisel, 1-1/8 inch hexagon shank

It just might be the most useful hand operated construction tool to come along in the last decade. Produces an incredible 1450 ft. lbs. of energy per ..

$55.39

General Equipment 102-1200 Standard 3 inch chisel, 1-1/8 inch hexagon shank

It just might be the most useful hand operated construction tool to come along in the last decade. Produces an incredible 1450 ft. lbs. of energy per ..

$80.33

General Equipment 102-1400 Chisel, 5inch

1-1/8 inch hex x 6 inch shank, 5 inch asphalt spade accessory tool. Used for removing thinset-type materials from concrete surfaces. Forged from a..

$189.00

General Equipment 102-1500A Chisel, 5inch

1-1/8 inch hex x 6 inch shank, scraper blade accessory tool. Used with scraper blades to remove material buildups and thinset-type materials from co..

$193.00

General Equipment 130C Clamp Mount Cut-R-Tach, 13.5 inches

Bucket Mount, 13.5 inch diameter blade, 5.0 inch maximum cutting depth. Twin Oilite®-type, sleeve bearings, 25,000 lbs maximum down force capacity. No..

$2,095.25

General Equipment 130C-0020A Steel Blade for 130 CUT-R-TACH

Description: Replacement Cutting Blade. Complete with Oilite®-Type, Sleeve Bearings and Hub.Product Application: 130 Series CUT-R-T..

$866.00

General Equipment 190C Clamp Mount Cut-R-Tach, 19 inches

190C Clamp Mount CUT-R-TACH® Rotary Asphalt Cutting AttachmentBucket Mount, 19.0 inch diameter blade, 5.5 inch maximum cutting depth. Twin Timken®-typ..

$2,755.00

General Equipment 190C-0010 Steel Blade for 130 CUT-R-TACH

Description: Replacement Cutting Blade. Complete with Oilite®-Type, Sleeve Bearings and Hub.Product Application: 190 Series General..

$925.85

General Equipment 190M Moldboard Mount Cut-R-Tach, 19 inches

190C Clamp Mount CUT-R-TACH® Rotary Asphalt Cutting AttachmentBucket Mount, 19.0 inch diameter blade, 5.5 inch maximum cutting depth. Twin Timken®-typ..

$3,485.05

General Equipment 190MB Mounting Block, used with 190S

Scarifier Mount (1” x 3” shank), 19 inch diameter blade, 5-1/2 inches maximum cutting depth. Twin Timken®-type, tapered roller bearings, 50,000 lbs ma..

$687.00

General Equipment 190S Scarifier Mount Cut-R-Tach, 19 inches

Scarifier Mount (1” x 3” shank), 19 inch diameter blade, 5-1/2 inches maximum cutting depth. Twin Timken®-type, tapered roller bearings, 50,000 lbs ma..

$2,050.00

General Equipment 2350-10E 10 inch Bor-Max Diameter Earth Auger

1 Inch Diameter Round Female Hub ConnectionSpecifications Part No. 2350-10E Flighting OD 10 inch ..

$320.00

General Equipment 2350-12E 12 inch Bor-Max Diameter Earth Auger

1 Inch Diameter Round Female Hub ConnectionSpecifications Part No. 2350-12E Flighting OD 12 inch ..

$396.00

General Equipment 2350-2E 2-1/4 inch Bor-Max Diameter Earth Auger

1 Inch Diameter Round Female Hub ConnectionSpecifications Part No. 2350-2E Flighting OD 2-1/4 inc..

$185.00

General Equipment 2350-3E 3-1/4 inch Bor-Max Diameter Earth Auger

1 Inch Diameter Round Female Hub ConnectionSpecifications Part No. 2350-3E Flighting OD 3-1/4 inc..

$190.00

General Equipment 4400-14E3 14" Earth Auger

General Equipment Company offers a complete line of earth augers and extensions for the 330H, 332H and 660 DIG-R-MOBILE® hole digg..

$560.00

General Equipment 4400-16E3 16" Earth Auger

General Equipment Company offers a complete line of earth augers and extensions for the 330H, 332H and 660 DIG-R-MOBILE® hole digg..

$895.00

General Equipment 4400-18P 18" Earth Auger

Specifications Part No. 4400-18P Flighting OD..

$835.00

General Equipment 4400-2E3 2-1/4 inch Diameter Earth Auger

General Equipment Company offers a complete line of earth augers and extensions for the 330H, 332H and 660 DIG-R-MOBILE® hole digg..

$362.85

General Equipment 4400-3E3 3-1/4 inch Diameter Earth Auger

General Equipment Company offers a complete line of earth augers and extensions for the 330H, 332H and 660 DIG-R-MOBILE® hole digg..

$358.85

General Equipment 4400-4E3 4-1/4 inch Diameter Earth Auger

General Equipment Company offers a complete line of earth augers and extensions for the 330H, 332H and 660 DIG-R-MOBILE® hole digg..

$364.00

General Equipment 4450-12E3 12" Earth Auger

General Equipment Company offers a complete line of earth augers and extensions for the 330H, 332H and 660 DIG-R-MOBILE® hole digg..

$480.00

General Equipment 4450-6E3 6 inch Diameter Earth Auger

General Equipment Company offers a complete line of earth augers and extensions for the 330H, 332H and 660 DIG-R-MOBILE® ..

$400.00

General Equipment 4450-8E3 8" Earth Auger

General Equipment Company offers a complete line of earth augers and extensions for the 330H, 332H and 660 DIG-R-MOBILE® hole digg..

$415.00

Diamond Products CP305 Handheld Polisher, 5801328

Features Uses three 5” diamond polishing pads and/or diamond grinding discs Planetary, gear driven system Powered by a heavy duty ..

$4,172.00

Diamond Products CPG102E1 Single Head Floor Grinder Baldor® 2 HP-1PH, 115V or 230V, 5800727

Features Remote throttle 2” dust port opening Single grease point Steel box frame Adjustable operator handles Lifting handle..

$4,490.00

Diamond Products CPG110H Single Head Floor Grinder Honda® GXV390, 5800726

FeaturesRemote throttle 2” dust port opening Single grease point Steel box frame Adjustable operator handles Lifting handles Adjust..

$5,024.00

Diamond Products CPG175E1 Single Head Floor Grinder Baldor® 7.5 HP-1PH, 230V, 5800828

Features Remote throttle 2” dust port opening Single grease point Steel box frame Adjustable operator handles Lifting handle..

$6,450.00

Diamond Products CPG175E3 Single Head Floor Grinder Baldor® 7.5 HP-3PH, 5800829A/ 5800829B

please choose options for selected product230V-5800829A460V-5800829B Features Remote throttle 2” dust port open..

$6,230.00

Diamond Products CPG202E1 Dual Head Floor Grinder 2 HP-1PH, 115V or 230V, 5801235

FeaturesRemote throttle 2” dust port opening Multiple grease point 1/4” thick steel box frame Water hose connection Adjustable operat..

$8,420.00

Diamond Products CPG210H Dual Head Floor Grinder Honda® GXV390 10.2 HP, 5801238

FeaturesRemote throttle 2” dust port opening Multiple grease point 1/4” thick steel box frame Water hose connection Adjustable operat..

$9,048.00

Diamond Products CPG275E3 Dual Head Floor Grinder 7.5 HP-3 PH, 460 Volt 5801237B

FeaturesRemote throttle 2” dust port opening Multiple grease point 1/4” thick steel box frame Water hose connection Adjustable operat..

$10,282.00

Diamond Products CPG82E1-8 Low Profiile Floor Grinder, 5801037

Features 2 HP Baldor-1PH, 115V, 16 amp motor Remove paint, epoxy and rough spots Easy to maneuver push drive Slurry skirt keeps ..

$3,840.00

Bosch CSG15 Concrete Surfacing Grinder 5"

Genuine OEM BoschBosch CSG15 Concrete Surfacing Grinder 5"FEATURES / BENEFITSDual air chambers provide for both dust collection during ..

$498.50

Bosch GWX10-45DE Grinder 4-1/2" 10A with Paddle D X-Lock Grinder

-42 %

Bosch GWX10-45DE Grinder 4-1/2" 10A with Paddle D X-Lock GrinderFEATURES / BENEFITSErgonomic, powerful grinder design engineered with..

$108.00 $185.00

Diamond Products CG-1E15 10" Mini Groover 15 HP Marathon 5803005

FeaturesCompact and maneuverable machine that can be used for grooving and grinding applications Great for grooving and grinding and projects..

$36,500.00

Diamond Products CG-1G24 10" Mini Groover 20.5HP Honda 5803003

FeaturesCompact and maneuverable machine that can be used for grooving and grinding applications Great for grooving and grinding and projects..

$28,500.00

Diamond Products CG-249KT4 16" Mini Groover 49 HP Kubota Diesel

FeaturesCompact and maneuverable machine that can be used for grooving and grinding applications Great for grooving and grinding and projects..

$64,210.00

Diamond Products CGHS500058BSH 5" X 5/8"-11 Low Profile Heavy Duty Single Row Cup Grinder

Genuine OEM Diamond ProductDiamond Products CGHS500058BSH 5" X 5/8"-11 Low Profile Heavy Duty Single Row Cup GrinderFeature:Heavy Duty Or..

$287.00

Diamond Products CGHS500078BSH 5" X 7/8" Low Profile Heavy Duty Single Row Cup Grinder

Genuine OEM Diamond ProductDiamond Products CGHS500078BSH 5" X 7/8" Low Profile Heavy Duty Single Row Cup GrinderFeature:Heavy Duty Orang..

$287.00

Diamond Products CGHT51258BSH 5" X 5/8"-11 Low Profile Heavy Duty Spiral Turbo Cup Grinder With 12 Segs

Genuine OEM Diamond ProductDiamond Products CGHT51258BSH 5" X 5/8"-11 Low Profile Heavy Duty Spiral Turbo Cup Grinder With 12 SegsFeature: ..

$336.00

Diamond Products CGHT51278BSH 5" X 7/8" Low Profile Heavy Duty Spiral Turbo Cup Grinder With 12 Segs

Genuine OEM Diamond ProductDiamond Products CGHT51278BSH 5" X 7/8" Low Profile Heavy Duty Spiral Turbo Cup Grinder With 12 SegsFeature:He..

$336.00

Diamond Products CPG205E3 Grinder Polisher, 5802000

Diamond Products CPG205E3 Grinder Polisher, 5802000

Call/Text 510-761-1112 for info

Diamond Products CPG205E3 Grinder Polisher, 5802000FEATURES:Compact, light-weight design and disconnect components for increased mobility ..

$0.00

Diamond Products CPG275E1 Dual Head Floor Grinder, 7.5 HP-1 PH, 230 Volt 5801236

FeaturesRemote throttle 2” dust port opening Multiple grease point 1/4” thick steel box frame Water hose connection Adjustable operat..

$10,511.00

Diamond Products CPG275E1 Dual Head Floor Grinder, 7.5 HP-3 PH, 230 Volt 5801237A

FeaturesRemote throttle 2” dust port opening Multiple grease point 1/4” thick steel box frame Water hose connection Adjustable operat..

$10,182.00

Diamond Products CPG82E1-8 Core Prep Floor Grinder With 2hp,115v Baldor Electric With 8" Head Capacity - Low Profile, 5800989PKG

Diamond Products CPG82E-8 Core Prep Floor Grinder With 2hp,115v Baldor Electric With 8" Head Capacity - Low Profile, 5800989PKGFeatures & Bene..

$3,840.00

Diamond Products CPSB810E3 Shot Blaster, 5802007

Call/Text 510-761-1112 for info

Diamond Products CPSB810E3 Shot Blaster, 5802007FEATURES:Variable Drive Unit For Forward And Backward LED Headlights 5-Blade Techno..

$0.00

Diamond Products CPST1415E1 Floor Stripper, 5802006

Diamond Products CPST1415E1 Floor Stripper, 5802006

Call/Text 510-761-1112 for info

Diamond Products CPST1415E1 Floor Stripper, 5802006FEATURES:Direct Drive Power Travel Height-Adjustable Protrective Cover Helps Pre..

$0.00

Edco 2D-HDE Magna-Trap HD Floor Grinder Electric 5HP 230 V (58100)

-11 % Sold Out

Edco 2D-HDE Magna-Trap HD Floor Grinder Electric 5HP 230 V 58100FEATURES / BENEFITS5HP, 230V 22 Working Width grinds approximately 500 sq..

$11,085.00 $12,393.94