General Equipment FCS16-1200PAK2 Mastic Removal Blade 2pc

California Proposition 65 Warning

WARNING: This product can expose you to chemicals known to the State of California to cause cancer, birth defects, or other reproductive harm. For more information, go to www.P65Warnings.ca.gov.

Mastic, adhesive and material build up removal

Not intended to remove actual floor covering materials. remove remaining material residue and mastic/adhesive on concrete floor only. steeper blade angle increases material removal rates over other blade configurations.

4 In. x 6 In. x 1.5 mm nominal

Laser cut, heat treated, steel

For use with FCS10 and FCS16 RIP-R-STRIPPER products. Can also be used with competitive products.

SINGLE CYLINDER REPAIR

If you have any questions about any products. Please email us at info@singlecylinderstore.com or call us at 877-558-1112

General
Application	Commercial
Inventory
Condition	New

Same Brand
Same Category

General Equipment 102-1000 Standard moil point, 1-1/8 inch hexagon shank

It just might be the most useful hand operated construction tool to come along in the last decade. Produces an incredible 1450 ft. lbs. of energy per ..

$55.39

General Equipment 102-1100 Standard narrow chisel, 1-1/8 inch hexagon shank

It just might be the most useful hand operated construction tool to come along in the last decade. Produces an incredible 1450 ft. lbs. of energy per ..

$55.39

General Equipment 102-1200 Standard 3 inch chisel, 1-1/8 inch hexagon shank

It just might be the most useful hand operated construction tool to come along in the last decade. Produces an incredible 1450 ft. lbs. of energy per ..

$80.33

General Equipment 102-1400 Chisel, 5inch

1-1/8 inch hex x 6 inch shank, 5 inch asphalt spade accessory tool. Used for removing thinset-type materials from concrete surfaces. Forged from a..

$189.00

General Equipment 102-1500A Chisel, 5inch

1-1/8 inch hex x 6 inch shank, scraper blade accessory tool. Used with scraper blades to remove material buildups and thinset-type materials from co..

$193.00

General Equipment 130C Clamp Mount Cut-R-Tach, 13.5 inches

Bucket Mount, 13.5 inch diameter blade, 5.0 inch maximum cutting depth. Twin Oilite®-type, sleeve bearings, 25,000 lbs maximum down force capacity. No..

$2,095.25

General Equipment 130C-0020A Steel Blade for 130 CUT-R-TACH

Description: Replacement Cutting Blade. Complete with Oilite®-Type, Sleeve Bearings and Hub.Product Application: 130 Series CUT-R-T..

$866.00

General Equipment 190C Clamp Mount Cut-R-Tach, 19 inches

190C Clamp Mount CUT-R-TACH® Rotary Asphalt Cutting AttachmentBucket Mount, 19.0 inch diameter blade, 5.5 inch maximum cutting depth. Twin Timken®-typ..

$2,755.00

General Equipment 190C-0010 Steel Blade for 130 CUT-R-TACH

Description: Replacement Cutting Blade. Complete with Oilite®-Type, Sleeve Bearings and Hub.Product Application: 190 Series General..

$925.85

General Equipment 190M Moldboard Mount Cut-R-Tach, 19 inches

190C Clamp Mount CUT-R-TACH® Rotary Asphalt Cutting AttachmentBucket Mount, 19.0 inch diameter blade, 5.5 inch maximum cutting depth. Twin Timken®-typ..

$3,485.05

General Equipment 190MB Mounting Block, used with 190S

Scarifier Mount (1” x 3” shank), 19 inch diameter blade, 5-1/2 inches maximum cutting depth. Twin Timken®-type, tapered roller bearings, 50,000 lbs ma..

$687.00

General Equipment 190S Scarifier Mount Cut-R-Tach, 19 inches

Scarifier Mount (1” x 3” shank), 19 inch diameter blade, 5-1/2 inches maximum cutting depth. Twin Timken®-type, tapered roller bearings, 50,000 lbs ma..

$2,050.00

General Equipment 2350-10E 10 inch Bor-Max Diameter Earth Auger

1 Inch Diameter Round Female Hub ConnectionSpecifications Part No. 2350-10E Flighting OD 10 inch ..

$320.00

General Equipment 2350-12E 12 inch Bor-Max Diameter Earth Auger

1 Inch Diameter Round Female Hub ConnectionSpecifications Part No. 2350-12E Flighting OD 12 inch ..

$396.00

General Equipment 2350-2E 2-1/4 inch Bor-Max Diameter Earth Auger

1 Inch Diameter Round Female Hub ConnectionSpecifications Part No. 2350-2E Flighting OD 2-1/4 inc..

$185.00

General Equipment 2350-3E 3-1/4 inch Bor-Max Diameter Earth Auger

1 Inch Diameter Round Female Hub ConnectionSpecifications Part No. 2350-3E Flighting OD 3-1/4 inc..

$190.00

General Equipment 4400-14E3 14" Earth Auger

General Equipment Company offers a complete line of earth augers and extensions for the 330H, 332H and 660 DIG-R-MOBILE® hole digg..

$560.00

General Equipment 4400-16E3 16" Earth Auger

General Equipment Company offers a complete line of earth augers and extensions for the 330H, 332H and 660 DIG-R-MOBILE® hole digg..

$895.00

General Equipment 4400-18P 18" Earth Auger

Specifications Part No. 4400-18P Flighting OD..

$835.00

General Equipment 4400-2E3 2-1/4 inch Diameter Earth Auger

General Equipment Company offers a complete line of earth augers and extensions for the 330H, 332H and 660 DIG-R-MOBILE® hole digg..

$362.85

General Equipment 4400-3E3 3-1/4 inch Diameter Earth Auger

General Equipment Company offers a complete line of earth augers and extensions for the 330H, 332H and 660 DIG-R-MOBILE® hole digg..

$358.85

General Equipment 4400-4E3 4-1/4 inch Diameter Earth Auger

General Equipment Company offers a complete line of earth augers and extensions for the 330H, 332H and 660 DIG-R-MOBILE® hole digg..

$364.00

General Equipment 4450-12E3 12" Earth Auger

General Equipment Company offers a complete line of earth augers and extensions for the 330H, 332H and 660 DIG-R-MOBILE® hole digg..

$480.00

General Equipment 4450-6E3 6 inch Diameter Earth Auger

General Equipment Company offers a complete line of earth augers and extensions for the 330H, 332H and 660 DIG-R-MOBILE® ..

$400.00

General Equipment 4450-8E3 8" Earth Auger

General Equipment Company offers a complete line of earth augers and extensions for the 330H, 332H and 660 DIG-R-MOBILE® hole digg..

$415.00

Bosch 2610992179 Scraper Blade "New Style" Tapered 4 IN Top To 6 IN Floor

Genuine OEM BoschBosch 2610992179 Scraper Blade "New Style" Tapered 4 IN Top To 6 IN FloorSINGLE CYLINDER REPAIRIf you have any ..

$57.00

Bosch HS1810 Scaling Chisel 3"X 12"Round Hex

Genuine OEM BoschBosch HS1810 Scaling Chisel 3"X 12"Round HexSINGLE CYLINDER REPAIRIf you have any questions about any prod..

$54.00

Bosch HS1817 Round Hex Shank 2-INX 12" Scaling Chisel

Genuine OEM BoschBosch HS1817 Round Hex Shank 2-INX 12" Scaling ChiselSINGLE CYLINDER REPAIRIf you have any questions about..

$47.00

Bosch HS1906 Asphalt Cutter SDS-Max 5" X 15"

Genuine OEM BoschBosch HS1906 Asphalt Cutter SDS-Max 5" X 15"SINGLE CYLINDER REPAIRIf you have any questions about any prod..

$129.00

Bosch HS1910 Scaling Chisel SDS-Max 3"X12"

Genuine OEM BoschBosch HS1910 Scaling Chisel SDS-Max 3"X12"SINGLE CYLINDER REPAIRIf you have any questions about any produc..

$48.00

Bosch HS1913 Bull Point SDS-Max 12" Length

Genuine OEM BoschBosch HS1913 Bull Point SDS-Max 12" LengthSINGLE CYLINDER REPAIRIf you have any questions about any produc..

$29.00

Bosch HS1917 Scaling Chisel SDS-Max 2"X14"

Genuine OEM BoschBosch HS1917 Scaling Chisel SDS-Max 2"X14"SINGLE CYLINDER REPAIRIf you have any questions about any produc..

$42.00

Bosch HS1918 Floor Scraper 6" X 25" SDS-Max

Genuine OEM BoschBosch HS1918 Floor Scraper 6" X 25" SDS-MaxSINGLE CYLINDER REPAIRIf you have any questions about any produ..

$337.00

Bosch HS1935 Rtec Flat Chisel Sharp

-27 %

Bosch HS1935 Rtec Flat Chisel SharpSINGLE CYLINDER REPAIRIf you have any questions about any products . Please email us at..

$15.49 $21.22

Bosch HS2464 Chisel 3" Overall Length 19" 1-1/4" Hex Shank

-35 %

Genuine OEM BoschBosch HS2464 Chisel 3" Overall Length 19" 1-1/4" Hex ShankSINGLE CYLINDER REPAIRIf you have any questions ..

$30.99 $47.55

Brave BR16-1100 Straight Blade (4" x 6") Dual Beveled Edge

BR16-1100 Straight Blade (4" x 6") Dual Beveled Edge..

$19.00

Brave BR16-1100PAK3 Straight Blade 6L (Pack of 3)

Brave BR16-1100PAK3 Straight Blade 6L (Pack of 3)SINGLE CYLINDER REPAIRIf you have any questions about any products. Pleas..

$82.47

Brave BR16-1200PAK2.BRA Angled Blade (6" Wide) Single Beveled Edge - Cement Surface Only

Brave BR16-1200PAK2.BRA Angled Blade (6" Wide) Single Beveled Edge - Cement Surface Only

-6 %

BR16-1200 Angled Blade (6" Wide) Single Beveled Edge - Cement Surface Only..

$67.00 $71.44

Brave BR16-1300PAK3.BRA Straight Blade (3" x 10") Single Beveled Edge

BR16-1300 Straight Blade (3" x 10") Single Beveled EdgeSINGLE CYLINDER REPAIRIf you have any questions about any products. ..

$60.00

Brave BR16-1500PAK2.BRA Scoring Blade (8" Wide) Single Beveled Edge Facing Up

BR16-1500 Scoring Blade (8" Wide) Single Beveled Edge Facing Up - Remove Carpet, Linoleum, VCT, etc. From Cement..

$62.00

Brave BR16-1600PAK2.BRA Scoring Blade (8" Wide) Single Beveled Edge Facing Down

-5 %

BR16-1600 Scoring Blade (8" Wide) Single Beveled Edge Facing Down - Remove Carpet, Linoleum, VCT, etc. From Wood..

$67.00 $70.88

Edco 12230-30 Spacers 30/PK

Genuine OEM EdcoEdco 12230-30 Spacers 30/PKSINGLE CYLINDER REPAIRIf you have any questions about any products . Please..

$12.50

Edco 27034 BS-3M Blade Adapter 7/8"Shank

-10 % Sold Out

Genuine OEM EdcoEdco 27034 BS-3M Blade Adapter 7/8"ShankSINGLE CYLINDER REPAIRIf you have any questions about any products...

$109.80 $121.71

Edco 27035 Scraper Blade 6" (Pack Of 5)

-11 %

Genuine OEM Edco.Edco 27035 Scraper Blade 6" (Pack Of 5)FEATURES / BENEFITSShown with Blade Adapter # 27034 SINGLE CYLIND..

$142.00 $160.33

Edco 27037 Chipping Point

-10 % Sold Out

Genuine OEM EdcoEdco 27037 Chipping PointSINGLE CYLINDER REPAIRIf you have any questions about any products . Please e..

$67.40 $74.90

Edco 27060 Big Stick Accy PKG

Sold Out

Genuine OEM EdcoEdco 27060 Big Stick Accy PKGFEATURES / BENEFITS2" Chisel; 3" Chisel; Two- 3" Milled Chisels; 6" Scraper Blade..

$513.78

Edco 28155 Serrated Ceramic Tile Blade 8" 5/PK

-7 %

Genuine OEM EdcoEdco 28155 Serrated Ceramic Tile Blade 8" 5/PKSINGLE CYLINDER REPAIRIf you have any questions about any pro..

$89.90 $97.18

Edco ALR-2A Chisel Scaler Pneumatic 4' Alum (C10308A)

Call/Text 510-761-1112 for info

Feature/ BenefitsALR-4A Removes up to 200 sq. ft. per hour of 4 ceramic tile set in standard thin-set Provides 2,500 hits per minute High..

$0.00

Edco C10305 12" Scraper Blades (5 Pack)

-10 %

Genuine OEM EdcoEdco C10305 12" Scraper Blades (5 Pack)SINGLE CYLINDER REPAIRIf you have any questions about any products ...

$92.00 $102.75

Edco C10306 Milled Adapter 4"

-11 %

Genuine OEM EdcoEdco C10306 Milled Adapter 4"SINGLE CYLINDER REPAIRIf you have any questions about any products . Plea..

$107.50 $121.07