Diamond Products CCE25 with WSE1621 motor and inverter 5803032

California Proposition 65 Warning

WARNING: This product can expose you to chemicals known to the State of California to cause cancer, birth defects, or other reproductive harm. For more information, go to www.P65Warnings.ca.gov.

Feature

Simple and safe in the application with minimum installation time
Economical, replaces expensive drill bits
Wire sawing instead of drilling opens up new application possibilities.
Elliptical shaped cutouts are possible.
Simple tensioning of the wire
Precise flexible water supply

Specification
Minimum Diameter:	20”
Maximum Diameter:	98”
Maximum Thickness:	24”
Wire Requirement:	Minimum 11 feet
Hydraulic motor	GR2
1 drive roll	200mm (180)
Diverter rolls	200mm (180)
Electric version
1 drive roll	200 mm (180)
Diverter rolls	200 mm (180)
Electric motor
Nominal power (32 A)	20 kW
Motor power S1 (32 A)	17 kW
Voltage	400–480 V
Frequency	50 / 60 Hz

SINGLE CYLINDER REPAIR

If you have any questions about any products. Please email us at info@singlecylinderstore.com or call us at 877-558-1112.

General
Power source	Electric
Application	Commercial
Inventory
Condition	New

Same Brand
Same Category

Diamond Products CC1000 Joint Cutting Saw

Call/Text 510-761-1112 for info

The Ultra Lightweight Saw That Cuts Decorative and Joint Cuts in Concrete.Features Power transference to blade drive via 2 molded notc..

$0.00

Diamond Products CC1000T 1-1/2 hp Super Duty Tile Saw, 5800572PKG

-16 %

Extra Wide Tile Saw for Large Tile Cutting JobsFeatures 3-3/4” cutting depth 1-1/2 HP, 15amp, 115V high torque motor Rip cut up to..

$1,498.50 $1,781.00

Diamond Products CC1111HUXL-14 Joint Cutting Mini Saw, 5801020

Features Heavy duty adjustable operator handles Easy to maneuver push drive Up-cut or down-cut available 1” arbor size with drive pi..

$3,600.72

Diamond Products CC1211HXL-14 Portable Saw, 14", Honda GX390, 5801093

Diamond Products CC1211HXL-14 Portable Saw, 14", Honda GX390, 5801093

-5 %

Features Heavy duty design, but light weight enough for two people to lift Cyclone air filter (Honda® models) Easy to read built..

$3,152.00 $3,300.92

Diamond Products CC125BXL-EE6 First-Cut Saw, Baldor Electric, 5801357,

-25 %

Features Maximum cutting depth of 1-3/16” Reliable skid plate system for green concrete Heavy duty design but light weight enough for ..

$3,474.75 $4,633.00

Diamond Products CC1300XL Electric Concrete Saw

Diamond Products CC1300XL Electric Concrete Saw

Call/Text 510-761-1112 for info

Diamond Products CC1300XL Gasoline Concrete SawDiamond Products CC1300XL Hydraulic Concrete Saw Saw Model # Blad..

$0.00

Diamond Products CC1300XL Gasoline Concrete Saw

Diamond Products CC1300XL Gasoline Concrete Saw

Call/Text 510-761-1112 for info

Diamond Products CC1300XL Electric Concrete SawDiamond Products CC1300XL Hydraulic Concrete Saw Saw Model # Blad..

$0.00

Diamond Products CC1313HYXL-20 20" Walk Behind Hydraulic Saw, Danfoss 25 GPM, 5800724C

Diamond Products CC1300XL Gasoline Concrete SawDiamond Products CC1300XL Electric Concrete Saw Saw Model # Blade..

$6,307.70

Diamond Products CC1507E3-20 Modular Saw, 5801500

For more information options please call us 18775581112Features Electric powered for areas with limited access and where exhaust ..

$10,205.16

Diamond Products CC1800XL Electric Medium Walk Behind Saw

Diamond Products CC1800XL Electric Medium Walk Behind Saw

Call/Text 510-761-1112 for info

Diamond Products CC1800XL Gas Medium Walk Behind SawDiamond Products CC1800XL Hydraulic Medium Walk Behind Saw Model # ..

$0.00

Diamond Products CC1800XL Gas Medium Walk Behind Saw

Diamond Products CC1800XL Gas Medium Walk Behind Saw

Call/Text 510-761-1112 for info

Diamond Products CC1800XL Electric Medium Walk Behind SawDiamond Products CC1800XL Hydraulic Medium Walk Behind Saw Model # ..

$0.00

Diamond Products CC1823BVXLP-14S 14” Propane Walk Behind Saw, 5801426

Features Briggs Vanguard engine converted to propane vapor draw Horizonally-mounted 20 lbs. propane tank Self-propelled travel for eas..

$12,032.76

Diamond Products CC190PRO-EE First-Cut Saw 5801128

Diamond Products CC190PRO-EE First-Cut Saw 5801128

-20 %

For more information options please call us 18775581112Features Capable of .110” to .250” thick blades Self propelled drive Raise ..

$15,478.50 $19,305.00

Diamond Products CC300M 2 HP-115 Volt 15 amp Electric Masonry Saw

Diamond Products CC300M 2 HP-115 Volt 15 amp Electric Masonry Saw

-23 %

14" Blade Capacity.Features The most cost-efficient way to cut masonry Cuts 5” deep with 14” blade Powerful 2 HP electric motor ..

$1,159.00 $1,509.00

Diamond Products CC500MXL2 Masonry Saw

Call/Text 510-761-1112 for info

This item is backordered until Jan-2023Versatile and PowerfulFeatures Stay level blade guard Removable cutting head Leg kit st..

$0.00

Diamond Products CC600T 3/4 HP Electric Tile Saw w/7" Blade Guard, 5800558PKG

-20 %

Small, Portable Saw for General Tile Cutting7" Capacity (5/8" arbor)Features 1-3/4” maximum cutting depth Easy to clean water tr..

$735.00 $923.00

Diamond Products CC800M Electric Block Saw

Diamond Products CC800M Gasoline Block SawRugged Block Saw For Large ApplicationsFeatures24” blade cuts a 10” block in a single pass ..

$0.00

Diamond Products CC800M Gasoline Block Saw

Call/Text 510-761-1112 for info

Diamond Products CC800M Electric Block SawRugged Block Saw For Large ApplicationsFeatures24” blade cuts a 10” block in a single pass ..

$6,491.00

Diamond Products CC900TE 1-1/2 hp 10" Electric Economy Tile Saw, 5800559PKG

-20 %

Large Tile Saw at an Economical CostFeatures 3-3/4” cutting depth 1-1/2 HP, 15amp, 115V high torque motor Rip cut up to 20”, diago..

$1,295.00 $1,617.00

Diamond Products CC912TS Electric Tile Saw with 9" Blade Capacity, 5801608PKG

Diamond Products CC912TS Electric Tile Saw with 9" Blade Capacity, 5801608PKG

-19 %

Light-weight and compact for high performance cutting.9" blade capacity with 1" arbor.Features Heavy duty table with measuring gui..

$616.00 $765.00

Diamond Products CCE0911H-20 Portable Saw, Honda GX390, 20”, 5801613

FeaturesHeavy duty design, but light-weight enough for two people to lift Cyclone air filter Easy to read built-in depth indicator Precis..

$3,097.02

Diamond Products CP305 Handheld Polisher, 5801328

Diamond Products CP305 Handheld Polisher, 5801328

-14 %

Features Uses three 5” diamond polishing pads and/or diamond grinding discs Planetary, gear driven system Powered by a heavy duty ..

$4,390.00 $5,107.00

Diamond Products CPG102E1 Single Head Floor Grinder Baldor® 2 HP-1PH, 115V or 230V, 5800727

-4 %

Features Remote throttle 2” dust port opening Single grease point Steel box frame Adjustable operator handles Lifting handle..

$4,796.00 $4,981.00

Diamond Products CPG110H Single Head Floor Grinder Honda® GXV390, 5800726

-6 % Pre-Order

FeaturesRemote throttle 2” dust port opening Single grease point Steel box frame Adjustable operator handles Lifting handles Adjust..

$5,548.00 $5,920.00

Diamond Products CPG175E1 Single Head Floor Grinder Baldor® 7.5 HP-1PH, 230V, 5800828

-6 %

Features Remote throttle 2” dust port opening Single grease point Steel box frame Adjustable operator handles Lifting handle..

$6,998.00 $7,468.00

Diamond Products 3402034 Plunge Wire Saw Pulley Assembly Left Side

-10 %

Plunge Wire Saw Pulley Assembly Left Side CCH25/CCE25 Wire saws AccessorieFeaturesSturdy Design Gentle Wire guidance thanks to plast..

$5,452.00 $6,076.00

Diamond Products 3402035 Plunge Wire Saw Pulley Assembly Right Side

-10 %

Plunge Wire Saw Pulley Assembly Right Side CCH25/CCE25 Wire saws AccessorieFeaturesSturdy Design Gentle Wire guidance thanks to plas..

$5,450.00 $6,076.00

Diamond Products 3404027 Universal Transition Pulley

-11 %

Universal Transition Pulley CCH25/CCE25 Wire saws Accessorie SINGLE CYLINDER REPAIRIf you have any questions abou..

$5,885.00 $6,587.00

Diamond Products 5800059 Wire Saw Control Station

-15 %

Wire Saw Control Station With 25 Ft Hoses & Qd's Application for WS25 Wire Saw SINGLE CYLINDER REPAIRIf you ha..

$16,115.00 $19,007.00

Diamond Products 5800621 WS25 Flush Cut Wire Saw for Use with BS2

-10 %

FeaturesNo vibration or noise and fast cutting speed Modular design provides infinite setup options Universal clamps provide infinite orien..

$15,726.00 $17,452.00

Diamond Products 5800622 WS25 Flush Cut Wire Saw for Use with Control Station

-10 %

FeaturesNo vibration or noise and fast cutting speed Modular design provides infinite setup options Universal clamps provide infinite orien..

$15,726.00 $17,452.00

Diamond Products 5802248 M-2 Wire Saw with Standard Anchor Base

-10 %

Features 6' column (longer columns available, up to 120") Anchor base with wheels Roller carriage for increased stability Built-..

$9,840.00 $10,934.00

Diamond Products CCE25 Kit for WSE1217 Circular Wire Saw, 5803026

-10 %

CCE25 Kit for WSE1217 Circular Wire Saw without Main Motor or Controller/InverterFeatureSimple and safe in the application with minimum ins..

$18,250.00 $20,334.00

Diamond Products CCE25 Kit for WSE1621 less motor and inverter 5803031

-10 %

FeatureSimple and safe in the application with minimum installation time Economical, replaces expensive drill bits Wire sawing instead of d..

$21,880.00 $24,383.00

Diamond Products CCH25 Complete Wire Saw with 22 CC Motor 5802240

-10 %

FeatureSimple and safe in the application with minimum installation time Economical, replaces expensive drill bits Wire sawing instead of d..

$19,005.00 $21,233.00

Diamond Products SB Wire Saw with 40 CC Motor 5802228

Diamond Products SB Wire Saw with 40 CC Motor 5802228

-6 %

Features Patented multiple roll drive allows you to start running with minimum wire tension Cutting rate increases by 50% compared to co..

$37,654.00 $39,954.00

Diamond Products WCE14 Kit Without Main Motor, Inverter or Controller

Has Been Discontinued/Obsolete

Features Provides consistent tension and wire speed Modular saw disassembles into separate pieces Core drilling mount Patented drive..

$26,138.00

Diamond Products WCE17 High Cycle Wire Saw Complete 5801551

-10 %

Features & BenefitsProvides consistent tension and wire speed Modular saw disassembles into separate pieces Multiple pulley drive for e..

$62,985.00 $70,113.00

Diamond Products WCE17 Kit for WSE1621 Wire Saw 5801550

-10 %

Features & BenefitsProvides consistent tension and wire speed Modular saw disassembles into separate pieces Multiple pulley drive for e..

$26,666.00 $29,624.00

Diamond Products WCH14 Complete Hydraulic Wire Saw with 30 CC Motor

Diamond Products WCH14 Complete Hydraulic Wire Saw with 30 CC Motor

Has Been Discontinued/Obsolete

Features Provides consistent tension and wire speed Modular saw disassembles into separate pieces Core drilling mount Patented drive..

$24,134.00

Diamond Products WCH17 Hydraulic WIre Saw Complete, 5801552

-10 %

Features & BenefitsProvides consistent tension and wire speed Modular saw disassembles into separate pieces Multiple pulley drive for e..

$25,564.00 $28,405.00

Diamond Products WS25 Wire Saw for use with BS2 5800061

-10 %

FeaturesNo vibration or noise and fast cutting speed Modular design provides infinite setup options Universal clamps provide infinite orien..

$15,726.00 $17,452.00

Diamond Products WS30-LE High Cycle Wire Saw with 460V Control Station 5802297

Diamond Products WS30-LE High Cycle Wire Saw with 460V Control Station 5802297

-11 %

Features Single 25HP high-cycle Compact electric motor that reduces weight and size versus traditional electric motors High speed wire c..

$85,580.00 $96,208.00

Diamond Products WS50-LE High Cycle Wire Saw with Control Unit 5801622

-10 %

Features & BenefitsTwin 25hp high-cycle compact electric motors: reduces weight and size vs. traditional electric motors Twin pneumatic c..

$129,906.00 $144,340.00

Husqvarna Construction 966565701 Wire Saw CS 10

Husqvarna Construction 966565701 Wire Saw CS 10CS 10 is a very useful and efficient saw system, thanks to a number of smart solutions. The saw is ..

$23,301.00