- Cast iron impeller and volute are wear resistant for long life and minimal service.
- Pump out vanes on back of impeller reduce debris accumulation and downtime while allowing greater productivity.
- Carbon ceramic mechanical seal teamed with reliable four-cycle engine with low oil shutdown provides for increased operating life.
- High strength lightweight die cast aluminum housing increases the years of trouble-free pump life. A heavy duty protective frame provides convenient carrying handles while adding extra protection for the pump.
Specifications
PG2A | |
Dimensions | |
L x W x H in | 18.9 x 14.8 x 15.5 |
L x W x H Shipping in | 19.9 x 15.8 x 16.7 |
Diameter Suction and Discharge in | 2 |
Operating weight lb | 53 |
Shipping weight lb | 57 |
Operating data | |
Discharge Head ft | 98 |
Discharge capacity US gpm | 159 |
Suction height Lift ft | 25 |
Solids diameter Max. Size in | 0.25 |
Engine / Motor | |
Engine / Motor type | Air Cooled, Single Cylinder |
Engine / Motor manufacturer | Honda |
Engine / Motor | GX120W1B4 |
Displacement in³ | 7.2 |
RPM / speed Max. Engine rpm | 3,600 |
RPM / speed Operating rpm | 3,600 |
Power Max. Rated hp | 3.5 |
Power Rating Specification | SAE J1349 |
Engine oil Capacity US qt | 0.63 |
Fuel type | Gasoline |
Fuel consumption US gal/h | 0.34 |
Tank capacity Fuel US qt | 2.6 |
Runtime h | 1.9 |
Hose Kits (for all 2-3" PG, PD and PT pumps) |
Extension Hose Kits (for all 2-3" pumps) |
| General | |
| Power source | Gas |
| Application | Commercial |
| Inventory | |
| Condition | New |
