Menu
Your Cart

Pullman Ermator T15000 3-Phase HEPA Extractor 201300403 (Hus: 967765801)

Pullman Ermator T15000 3-Phase HEPA Extractor 201300403 (Hus: 967765801)
-4 %
Pullman Ermator T15000 3-Phase HEPA Extractor 201300403 (Hus: 967765801)
  • Availability: In Stock
  • Model: T15000
  • MPN: 201300403 (Hus: 967765801)
Product Views: 2073
$16,564.00
$17,253.00
California Proposition 65 Warning
WARNING: This product can expose you to chemicals known to the State of California to cause cancer, birth defects, or other reproductive harm. For more information, go to www.P65Warnings.ca.gov.

The most powerful 230V HEPA Dust Extractor on the market today. Greatly expanded pre-filter surface area acts as a built-in pre-separator providing superior cyclonic separation for long, uninterrupted service periods. The T15000 produces plenty of airflow to handle a single four-head grinder or two each three-head grinders. T15000 is the only extractor that can keep up with a larger shaver. Clean air exhaust is guaranteed through four individually tested and certified HEPA filters. The intake port connects to a Y-connector where one or two 3" hoses can be connected. When used with one hose, up to 100-feet in length can be used. The out-port allows venting of the exhaust air away from the work area or outside of the building via a hose connection. Jet Pulse efficiently cleans pre-filter without exposing operator to dust. The unique 70-foot Longopac® allows fast, drop-down, dust-free disposal into approximately 25 individually sealed bags. Comes with a 3-inch, 33-foot hose, and a single 4-inch to double 3-inch Y connector.

When used with two 3-head grinders (up to 32" wide), and to achieve best results, a pre-separator should be connected between each grinder and the T15000.

Specifications

Motor (HP)

16

Amps

42

Air Flow Capacity (CFM)

647

Water Lift (in)

140

Shipping Weight (lbs)

905

Volts

230

General
Power sourceElectric
ApplicationCommercial
Inventory
ConditionNew

Write a review

Please login or register to review