-11 %
Pre-Order
Multiquip MRH800DS2 Walk-Behind Roller
$18,998.20
$21,380.00
California Proposition 65 Warning
WARNING: This product can expose you to chemicals known to the State of California to cause cancer, birth defects, or other reproductive harm. For more information, go to www.P65Warnings.ca.gov.
- Hydro-static drive eliminates drive belts and adjustments
- Infinite variable speed control gives the operator full control with forward and reverse speeds
- External mounted vibrator assembly for easy maintenance access
- Dead-man safety control stops roller when the operator removes hands from control levers
- Large rubber shock mounts minimize drum vibration transfer to engine and hydraulic components
- Guide handle folds up 90 degrees for easy transport and storage
- Narrow profile design for less than 1 inch (25 mm) side clearance
- Dual sprinkler controls wet drum individually
- Single access maintenance cover for easy access to all hydraulic components
- Permanently lubricated bearings are maintenance free
- Built-in tie-downs on all four corners secure the roller during transport
Unit Specifications
Compaction Force | 5300 lb | 23.57 kN |
Frequency | 3300 VPM | 55.3 Hz |
Travel Speed | mph | kph |
Water Tank Capacity | 10.6 gal | 40.12 L |
Drum Specifications
Front Drum Width | 25.6 in | 650 mm |
Rear Drum Width | 25.6 in | 650 mm |
Dimensions & Weights
Overall Length | 105 in | 2667 mm |
Overall Width | 27.2 in | 691 mm |
Overall Height | 41.7 in | 1059 mm |
Operating Weight | 1562 lb | 709 kg |
| General | |
| Power source | Gas |
| Application | Commercial |
| Inventory | |
| Condition | New |
