Multiquip FXA50A4 High Cycle Concrete Vibrator

-25% Multiquip FXA50A4 High Cycle Concrete Vibrator
2" head, 13.1' hose, 33' cord, 180 Hz
High-cycle vibrators are used with low-slump concrete where consistent power is needed to work a stiff mix into corners, around rebar and remove entrapped air pockets. These vibrators use a three-phase motors at 180 cycles and require a special generator capable of generating 180 cycles. The benefit is these vibrators retain 95% of their power under load.
  • Powered by a 4.5-amp electric motor
  • Permanently lubricated oversized head bearings for unmatched durability
  • Hose can be extended to 45 feet (13.5 meters)
  • Waterproof control box
  • Optional 50- and 100-foot (15, 30 meters) extension cords available
  • Requires high-cycle generator GDP5H
General
Power source Electric
Application Commercial
Inventory
Condition New

Write a review

Note: HTML is not translated!
    Bad           Good

  • Views: 2406
  • Brand: Multiquip
  • Product Code: FXA50A4 High Cycle Concrete Vibrator
  • Availability: In Stock
  • $1,800.95
  • $1,355.99