-75x75w.jpg "American Pneumatic Tool")
-16 %
Diamond Products M5PA-DK32-230 M-5 PRO Anchor Drill Rig w/o Control Panel, Weka DK32F, 4220077
$5,858.00
$7,007.00
-
Products
..
..
..
..
.. -
Top Brands
Top Brands
- Used Equipment
Diamond Products M5PA-DK32-230 M-5 PRO Anchor Drill Rig w/o Control Panel, Weka DK32F, 4220077
Call/Text 510-761-1112 for info
The Ultra Lightweight Saw That Cuts Decorative and Joint Cuts in Concrete.Features Power transference to blade drive via 2 molded notc..
$0.00
-21 %
Extra Wide Tile Saw for Large Tile Cutting JobsFeatures 3-3/4” cutting depth
1-1/2 HP, 15amp, 115V high torque motor
Rip cut up to..
$1,398.50 $1,781.00
-24 %
Features Heavy duty adjustable operator handles
Easy to maneuver push drive
Up-cut or down-cut available
1” arbor size with drive pi..
$3,008.00 $3,973.00
-17 %
Features Heavy duty design, but light weight enough for two people to lift
Cyclone air filter (Honda® models)
Easy to read built..
$3,152.00 $3,798.00
-25 %
Features Maximum cutting depth of 1-3/16”
Reliable skid plate system for green concrete
Heavy duty design but light weight enough for ..
$3,474.75 $4,633.00
Call/Text 510-761-1112 for info
Diamond Products CC1300XL Gasoline Concrete SawDiamond Products CC1300XL Hydraulic Concrete Saw
Saw Model #
Blad..
$0.00
Call/Text 510-761-1112 for info
Diamond Products CC1300XL Electric Concrete SawDiamond Products CC1300XL Hydraulic Concrete Saw
Saw Model #
Blad..
$0.00
-18 %
Diamond Products CC1300XL Gasoline Concrete SawDiamond Products CC1300XL Electric Concrete Saw
Saw Model #
Blade..
$5,845.00 $7,131.00
-20 %
For more information options please call us 18775581112Features Electric powered for areas with limited access and where exhaust ..
$9,185.00 $11,482.00
Call/Text 510-761-1112 for info
Diamond Products CC1800XL Gas Medium Walk Behind SawDiamond Products CC1800XL Hydraulic Medium Walk Behind Saw
Model #
..
$0.00
Call/Text 510-761-1112 for info
Diamond Products CC1800XL Electric Medium Walk Behind SawDiamond Products CC1800XL Hydraulic Medium Walk Behind Saw
Model #
..
$0.00
-20 %
Features Briggs Vanguard engine converted to propane vapor draw
Horizonally-mounted 20 lbs. propane tank
Self-propelled travel for eas..
$10,629.00 $13,287.00
-20 %
For more information options please call us 18775581112Features Capable of .110” to .250” thick blades
Self propelled drive
Raise ..
$15,478.50 $19,305.00
-23 %
14" Blade Capacity.Features The most cost-efficient way to cut masonry
Cuts 5” deep with 14” blade
Powerful 2 HP electric motor
..
$1,159.00 $1,509.00
Call/Text 510-761-1112 for info
This item is backordered until Jan-2023Versatile and PowerfulFeatures Stay level blade guard
Removable cutting head
Leg kit st..
$0.00
-20 %
Small, Portable Saw for General Tile Cutting7" Capacity (5/8" arbor)Features 1-3/4” maximum cutting depth
Easy to clean water tr..
$735.00 $923.00
Diamond Products CC800M Gasoline Block SawRugged Block Saw For Large ApplicationsFeatures24” blade cuts a 10” block in a single pass
..
$0.00
Call/Text 510-761-1112 for info
Diamond Products CC800M Electric Block SawRugged Block Saw For Large ApplicationsFeatures24” blade cuts a 10” block in a single pass
..
$6,491.00
-20 %
Large Tile Saw at an Economical CostFeatures 3-3/4” cutting depth
1-1/2 HP, 15amp, 115V high torque motor
Rip cut up to 20”, diago..
$1,295.00 $1,617.00
-19 %
Light-weight and compact for high performance cutting.9" blade capacity with 1" arbor.Features Heavy duty table with measuring gui..
$616.00 $765.00
-10 %
FeaturesHeavy duty design, but light-weight enough for two people to lift
Cyclone air filter
Easy to read built-in depth indicator
Precis..
$2,695.00 $3,007.00
-14 %
Features Uses three 5” diamond polishing pads and/or diamond grinding discs
Planetary, gear driven system
Powered by a heavy duty ..
$4,390.00 $5,107.00
-4 %
Features Remote throttle
2” dust port opening
Single grease point
Steel box frame
Adjustable operator handles
Lifting handle..
$4,796.00 $4,981.00
-6 %
Pre-Order
FeaturesRemote throttle
2” dust port opening
Single grease point
Steel box frame
Adjustable operator handles
Lifting handles
Adjust..
$5,548.00 $5,920.00
-6 %
Features Remote throttle
2” dust port opening
Single grease point
Steel box frame
Adjustable operator handles
Lifting handle..
$6,998.00 $7,468.00
-32 %
CP hydraulic core drills are ideal for working in confined areas - installing drainage, swer and water pipes, or cable and ventilation ducts where lar..
$3,299.00 $4,859.00
-32 %
CP hydraulic core drills are ideal for working in confined areas - installing drainage, sewer and water pipes, or cable and ventilation ducts where la..
$3,299.00 $4,859.00
-11 %
Mounted Hydraulic Motors White Motors Mounted into a pillow block with spindle. The core bit is then attached to the spind..
$1,539.00 $1,724.00
-6 %
.Mounted Hydraulic Char-Lynn Mounted into a pillow block with spindle. The core bit is then attached to the spindle for drilling. Motors ..
$1,116.00 $1,188.00
-5 %
.Mounted Hydraulic Char-Lynn Mounted into a pillow block with spindle. The core bit is then attached to the spindle for drilling. Motors ..
$1,106.00 $1,168.00
-7 %
.Mounted Hydraulic Char-Lynn Mounted into a pillow block with spindle. The core bit is then attached to the spindle for drilling. Motors ..
$1,225.00 $1,315.00
-7 %
.Mounted Hydraulic Char-Lynn Mounted into a pillow block with spindle. The core bit is then attached to the spindle for drilling. Motors ..
$1,135.00 $1,218.00
-6 %
.Mounted Hydraulic Char-Lynn Mounted into a pillow block with spindle. The core bit is then attached to the spindle for drilling. Motors ..
$1,126.00 $1,197.00
-7 %
.Mounted Hydraulic Char-Lynn Mounted into a pillow block with spindle. The core bit is then attached to the spindle for drilling. Motors ..
$1,143.00 $1,224.00
-6 %
.Mounted Hydraulic Char-Lynn Mounted into a pillow block with spindle. The core bit is then attached to the spindle for drilling. Motors ..
$1,178.00 $1,256.00
-9 %
Mounted Hydraulic Motors Danfoss Motors Mounted into a pillow block with spindle. The core bit is then attached to the spindle for dril..
$1,342.00 $1,478.00
-9 %
Mounted Hydraulic Motors Danfoss Motors Mounted into a pillow block with spindle. The core bit is then attached to the spindle for dril..
$1,535.00 $1,692.00
-9 %
Mounted Hydraulic Motors Danfoss Motors Mounted into a pillow block with spindle. The core bit is then attached to the spindle for dril..
$2,699.00 $2,957.00
-10 %
.Mounted Hydraulic Char-Lynn Mounted into a pillow block with spindle. The core bit is then attached to the spindle for drilling. Motors ..
$1,388.00 $1,542.00
-5 %
Mounted Hydraulic Motors White Motors Mounted into a pillow block with spindle. The core bit is then attached to the spind..
$1,639.00 $1,724.00
-13 %
Features Weighs only 35 lbs.
Single speed-800 RPM
Spring loaded slide handle for easy coring
Convenient carrying handle on carriage
..
$2,790.00 $3,224.00
-12 %
Features Weighs only 35 lbs.
Single speed-800 RPM
Spring loaded slide handle for easy coring
Convenient carrying handle on carriage
..
$1,650.00 $1,884.00
-15 %
Features Weighs only 35 lbs.
Single speed-800 RPM
Spring loaded slide handle for easy coring
Convenient carrying handle on carriage
..
$1,490.00 $1,752.00
-4 %
Features Weighs only 35 lbs.
Single speed-800 RPM
Spring loaded slide handle for easy coring
Convenient carrying handle on carriage
..
$2,558.00 $2,678.00
-14 %
Features & Benefits:Quick disconnect motor mount that makes it easy to remove the motor
4-spoke handle (can be used on right or left) on ..
$4,705.00 $5,486.00
-16 %
Picture is for reference only: M-1 vs CB733Features & BenefitsQuick disconnect motor mount that makes it easy to remove the motor
..
$4,120.00 $4,885.00
-15 %
Features Heavy duty
Water connection
1.250”-7 threaded spindle
Recommended for bits up 1”-12” Max 16”Specifications..
$3,189.00 $3,739.00
-15 %
Features Heavy duty
Water connection
1.250”-7 threaded spindle
Recommended for bits up 1”-12” Max 16”Specifications..
$3,189.00 $3,739.00
-15 %
Features Heavy duty
Water connection
1.250”-7 threaded spindle
Recommended for bits up 1”-12” Max 16”Specifications..
$3,189.00 $3,739.00
-16 %
FeaturesHeavy duty
Water connection
1.250”-7 threaded spindle
Recommended for bits 3”-18” Max 20”Specifications
..
$3,989.00 $4,765.00