Menu
Your Cart

Diamond Products CC5048DC-30 30" Walk Behind Diesel Saw 48HP CAT (2.2 liter), 5801423

Diamond Products CC5048DC-30 30" Walk Behind Diesel Saw 48HP CAT (2.2 liter), 5801423
Diamond Products CC5048DC-30 30" Walk Behind Diesel Saw 48HP CAT (2.2 liter), 5801423
Diamond Products CC5048DC-30 30" Walk Behind Diesel Saw 48HP CAT (2.2 liter), 5801423
-10 %
Diamond Products CC5048DC-30 30" Walk Behind Diesel Saw 48HP CAT (2.2 liter), 5801423
Diamond Products CC5048DC-30 30" Walk Behind Diesel Saw 48HP CAT (2.2 liter), 5801423
Diamond Products CC5048DC-30 30" Walk Behind Diesel Saw 48HP CAT (2.2 liter), 5801423
Diamond Products CC5048DC-30 30" Walk Behind Diesel Saw 48HP CAT (2.2 liter), 5801423
  • Availability: In Stock
  • Model: CC5048DC-30
  • SKU: 5801423
Product Views: 167
$40,900.00
$45,445.00
California Proposition 65 Warning
WARNING: This product can expose you to chemicals known to the State of California to cause cancer, birth defects, or other reproductive harm. For more information, go to www.P65Warnings.ca.gov.

Features 

  • Certified EPA/CARB C1.7 Stage 5 or C2.2 Tier 4 Engine for clean reliable power with Caterpillar’s latest engine technology
  • Up to 17-1/2” deep sawing with 42” blade and 7” quick disconnect flanges
  • Adjustable blade lowering speed that is dash mounted for quick, precise adjustment
  • Single hand sawing control with forward/reverse/raise/lower all in one ergonomic grip
  • Three position handle bars set and lock at comfortable, preferred angles
  • Large 6 gallon fuel tank with convenient left side filler door along with electronic low fuel level indication
  • Quick access rear cover screen for inspecting and service with simple latch convenience
  • Heavy duty wheels with durable polyurethane tread on front and thick rubber tread on the rear
  • Automatic parking brake with hydraulic activation in stop position gate
  • Robust blade shaft offers reliable support from 2 pillow block style, precision ball bearings
  • Spline drive PTO gives precision zero side load drive to dampen vibration and shock loads
  • Advanced air cleaner with radial seal primary and secondary filters with maintenance indicator
  • Sealed electronic protection resists heat, moisture, shock and vibration

Specifications

Model

CC5048DC-30

Part Nummber

5801423

Max. Depth with 30” Blade

12.5” with 5” OD flange at 1700 RPM

Engine Brand/Model

CAT C1.7 or C2.2 (DIT)

Engine Specification

1,7 liter, 3 cylinder or 2.2 liter, 4 cylinder, liquid-cooled, turbo diesel

Max Engine Power

48.3 HP (C1.7), 48.8 HP (C2.2) 2800 RPM (CAT rating)

Peak Engine Torque

122.8 ft.-lbs. (165 Nm) 1800 RPM

Blade Arbor Size

1” diameter with drive pin

Blade Flange Type

Quick disconnect

Blade Shaft

1-3/4” OD with left/right side blade mounting

Blade Shaft Drive

8 V-Belts (3VX)

Blade Raise & Lower

Electro-hydraulic power unit with push button control

Blade Depth Control

Electronic depth indicator and depth stop

Drive Speed

0-220 FPM (2.5 mph) forward/reverse

Rear Wheel Transmission

Hydraulic pump driving dual wheel motors

Parking Brake

Automatic hydraulic lock at stop position

Saftey Alerts

Emergency stop, blade over-speed, neutral start

Front Wheel Dimensions

8” x 3” with 1/2” poly tread (sealed ball bearings)

Rear Wheel Dimensions

10” x 3” with 1” rubber tread (quick disconnect bushing)

SINGLE CYLINDER REPAIR

If you have any questions about any products. Please email us at info@singlecylinderstore.com or call us at 877-558-1112

General
Power sourceDiesel
ApplicationCommercial
Inventory
ConditionNew

Write a review

Note: HTML is not translated!
Bad Good