Diamond Products CC1310E3XL-20 Walk Behind Electric Saw, Baldor®, 20&quot;, 10 HP-3PH,230V/460V, 5800985

California Proposition 69 Warning

Warning: This product contains chemicals known to the State of California to cause cancer, birth defects or other reproductive harm.

Features

Heavy duty frame design
Easy to maneuver push drive
Four position heavy duty handles offer no slack and don’t rattle like other adjustable handles
Through rear axle for added strength
Solid sealed and self aligning blade shaft bearings
Slip-on blade guard for easy blade access
Three V-belts for extra power delivery to the blade shaft
Left or right side sawing
Optional water tank available for dust suppression

Specifications

Blade Capacity	20"
Motor Make	Baldor®
Motor/Engine Power	10 HP-3PH,230V/460V
Part Number	5800985
Product Weight (lbs)	335
Maximum depth of cut with 20" blade:	6-5/8"
Blade shaft RPM:	2,600
Blade shaft diameter:	1-1/4"
Arbor size:	1" with single drive pin
Blade mounting:	Right or left
Blade raise/lower:	Precision screw feed
Handle bars:	Adjustable

General
Power source	Electric
Application	Commercial
Inventory
Condition	New

Same Brand
Same Category

Diamond Products CC1000 Joint Cutting Saw

Call/Text 510-761-1112 for info

The Ultra Lightweight Saw That Cuts Decorative and Joint Cuts in Concrete.Features Power transference to blade drive via 2 molded notc..

$0.00

Diamond Products CC1000T 1-1/2 hp Super Duty Tile Saw, 5800572PKG

-21 %

Extra Wide Tile Saw for Large Tile Cutting JobsFeatures 3-3/4” cutting depth 1-1/2 HP, 15amp, 115V high torque motor Rip cut up to..

$1,398.50 $1,781.00

Diamond Products CC1111HUXL-14 Joint Cutting Mini Saw, 5801020

-24 %

Features Heavy duty adjustable operator handles Easy to maneuver push drive Up-cut or down-cut available 1” arbor size with drive pi..

$3,008.00 $3,973.00

Diamond Products CC1211HXL-14 Portable Saw, 14", Honda GX390, 5801093

Diamond Products CC1211HXL-14 Portable Saw, 14", Honda GX390, 5801093

-17 %

Features Heavy duty design, but light weight enough for two people to lift Cyclone air filter (Honda® models) Easy to read built..

$3,152.00 $3,798.00

Diamond Products CC125BXL-EE6 First-Cut Saw, Baldor Electric, 5801357

-25 %

Features Maximum cutting depth of 1-3/16” Reliable skid plate system for green concrete Heavy duty design but light weight enough for ..

$3,474.75 $4,633.00

Diamond Products CC1300XL Electric Concrete Saw

Diamond Products CC1300XL Electric Concrete Saw

Call/Text 510-761-1112 for info

Diamond Products CC1300XL Gasoline Concrete SawDiamond Products CC1300XL Hydraulic Concrete Saw Saw Model # Blad..

$0.00

Diamond Products CC1300XL Gasoline Concrete Saw

Diamond Products CC1300XL Gasoline Concrete Saw

Call/Text 510-761-1112 for info

Diamond Products CC1300XL Electric Concrete SawDiamond Products CC1300XL Hydraulic Concrete Saw Saw Model # Blad..

$0.00

Diamond Products CC1313HYXL-20 20" Walk Behind Hydraulic Saw, Danfoss 25 GPM, 5800724C

Diamond Products CC1313HYXL-20 20" Walk Behind Hydraulic Saw, Danfoss 25 GPM, 5800724C

-18 %

Diamond Products CC1300XL Gasoline Concrete SawDiamond Products CC1300XL Electric Concrete Saw Saw Model # Blade..

$5,845.00 $7,131.00

Diamond Products CC1507E3-20 Modular Saw, 5801500

Diamond Products CC1507E3-20 Modular Saw, 5801500

-20 %

For more information options please call us 18775581112Features Electric powered for areas with limited access and where exhaust ..

$9,185.00 $11,482.00

Diamond Products CC1800XL Electric Medium Walk Behind Saw

Diamond Products CC1800XL Electric Medium Walk Behind Saw

Call/Text 510-761-1112 for info

Diamond Products CC1800XL Gas Medium Walk Behind SawDiamond Products CC1800XL Hydraulic Medium Walk Behind Saw Model # ..

$0.00

Diamond Products CC1800XL Gas Medium Walk Behind Saw

Diamond Products CC1800XL Gas Medium Walk Behind Saw

Call/Text 510-761-1112 for info

Diamond Products CC1800XL Electric Medium Walk Behind SawDiamond Products CC1800XL Hydraulic Medium Walk Behind Saw Model # ..

$0.00

Diamond Products CC1823BVXLP-14S 14” Propane Walk Behind Saw, 5801426

Diamond Products CC1823BVXLP-14S 14” Propane Walk Behind Saw, 5801426

-20 %

Features Briggs Vanguard engine converted to propane vapor draw Horizonally-mounted 20 lbs. propane tank Self-propelled travel for eas..

$10,629.00 $13,287.00

Diamond Products CC190PRO-EE First-Cut Saw 5801128

Diamond Products CC190PRO-EE First-Cut Saw 5801128

-20 %

For more information options please call us 18775581112Features Capable of .110” to .250” thick blades Self propelled drive Raise ..

$15,478.50 $19,305.00

Diamond Products CC300M 2 HP-115 Volt 15 amp Electric Masonry Saw

Diamond Products CC300M 2 HP-115 Volt 15 amp Electric Masonry Saw

-23 %

14" Blade Capacity.Features The most cost-efficient way to cut masonry Cuts 5” deep with 14” blade Powerful 2 HP electric motor ..

$1,159.00 $1,509.00

Diamond Products CC500MXL2 Masonry Saw

Call/Text 510-761-1112 for info

This item is backordered until Jan-2023Versatile and PowerfulFeatures Stay level blade guard Removable cutting head Leg kit st..

$0.00

Diamond Products CC600T 3/4 HP Electric Tile Saw w/7" Blade Guard, 5800558PKG

-20 %

Small, Portable Saw for General Tile Cutting7" Capacity (5/8" arbor)Features 1-3/4” maximum cutting depth Easy to clean water tr..

$735.00 $923.00

Diamond Products CC800M Electric Block Saw

Diamond Products CC800M Gasoline Block SawRugged Block Saw For Large ApplicationsFeatures24” blade cuts a 10” block in a single pass ..

$0.00

Diamond Products CC800M Gasoline Block Saw

Call/Text 510-761-1112 for info

Diamond Products CC800M Electric Block SawRugged Block Saw For Large ApplicationsFeatures24” blade cuts a 10” block in a single pass ..

$6,491.00

Diamond Products CC900TE 1-1/2 hp 10" Electric Economy Tile Saw, 5800559PKG

-20 %

Large Tile Saw at an Economical CostFeatures 3-3/4” cutting depth 1-1/2 HP, 15amp, 115V high torque motor Rip cut up to 20”, diago..

$1,295.00 $1,617.00

Diamond Products CC912TS Electric Tile Saw with 9" Blade Capacity, 5801608PKG

Diamond Products CC912TS Electric Tile Saw with 9" Blade Capacity, 5801608PKG

-19 %

Light-weight and compact for high performance cutting.9" blade capacity with 1" arbor.Features Heavy duty table with measuring gui..

$616.00 $765.00

Diamond Products CCE0911H-20 Portable Saw, Honda GX390, 20”, 5801613

Diamond Products CCE0911H-20 Portable Saw, Honda GX390, 20”, 5801613

-10 %

FeaturesHeavy duty design, but light-weight enough for two people to lift Cyclone air filter Easy to read built-in depth indicator Precis..

$2,695.00 $3,007.00

Diamond Products CP305 Handheld Polisher, 5801328

Diamond Products CP305 Handheld Polisher, 5801328

-14 %

Features Uses three 5” diamond polishing pads and/or diamond grinding discs Planetary, gear driven system Powered by a heavy duty ..

$4,390.00 $5,107.00

Diamond Products CPG102E1 Single Head Floor Grinder Baldor® 2 HP-1PH, 115V or 230V, 5800727

-4 %

Features Remote throttle 2” dust port opening Single grease point Steel box frame Adjustable operator handles Lifting handle..

$4,796.00 $4,981.00

Diamond Products CPG110H Single Head Floor Grinder Honda® GXV390, 5800726

-6 % Pre-Order

FeaturesRemote throttle 2” dust port opening Single grease point Steel box frame Adjustable operator handles Lifting handles Adjust..

$5,548.00 $5,920.00

Diamond Products CPG175E1 Single Head Floor Grinder Baldor® 7.5 HP-1PH, 230V, 5800828

-6 %

Features Remote throttle 2” dust port opening Single grease point Steel box frame Adjustable operator handles Lifting handle..

$6,998.00 $7,468.00

Diamond Products CC1000 Joint Cutting Saw

Call/Text 510-761-1112 for info

The Ultra Lightweight Saw That Cuts Decorative and Joint Cuts in Concrete.Features Power transference to blade drive via 2 molded notc..

$0.00

Diamond Products CC1111HUXL-14 Joint Cutting Mini Saw, 5801020

-24 %

Features Heavy duty adjustable operator handles Easy to maneuver push drive Up-cut or down-cut available 1” arbor size with drive pi..

$3,008.00 $3,973.00

Diamond Products CC1211HXL-14 Portable Saw, 14", Honda GX390, 5801093

-17 %

Features Heavy duty design, but light weight enough for two people to lift Cyclone air filter (Honda® models) Easy to read built..

$3,152.00 $3,798.00

Diamond Products CC125BXL-EE6 First-Cut Saw, Baldor Electric, 5801357

-25 %

Features Maximum cutting depth of 1-3/16” Reliable skid plate system for green concrete Heavy duty design but light weight enough for ..

$3,474.75 $4,633.00

Diamond Products CC1300XL Electric Concrete Saw

Call/Text 510-761-1112 for info

Diamond Products CC1300XL Gasoline Concrete SawDiamond Products CC1300XL Hydraulic Concrete Saw Saw Model # Blad..

$0.00

Diamond Products CC1300XL Gasoline Concrete Saw

Call/Text 510-761-1112 for info

Diamond Products CC1300XL Electric Concrete SawDiamond Products CC1300XL Hydraulic Concrete Saw Saw Model # Blad..

$0.00

Diamond Products CC1313HYXL-20 20" Walk Behind Hydraulic Saw, Danfoss 25 GPM, 5800724C

-18 %

Diamond Products CC1300XL Gasoline Concrete SawDiamond Products CC1300XL Electric Concrete Saw Saw Model # Blade..

$5,845.00 $7,131.00

Diamond Products CC1507E3-20 Modular Saw, 5801500

-20 %

For more information options please call us 18775581112Features Electric powered for areas with limited access and where exhaust ..

$9,185.00 $11,482.00

Diamond Products CC1800XL Electric Medium Walk Behind Saw

Call/Text 510-761-1112 for info

Diamond Products CC1800XL Gas Medium Walk Behind SawDiamond Products CC1800XL Hydraulic Medium Walk Behind Saw Model # ..

$0.00

Diamond Products CC1800XL Gas Medium Walk Behind Saw

Call/Text 510-761-1112 for info

Diamond Products CC1800XL Electric Medium Walk Behind SawDiamond Products CC1800XL Hydraulic Medium Walk Behind Saw Model # ..

$0.00

Diamond Products CC1823BVXLP-14S 14” Propane Walk Behind Saw, 5801426

-20 %

Features Briggs Vanguard engine converted to propane vapor draw Horizonally-mounted 20 lbs. propane tank Self-propelled travel for eas..

$10,629.00 $13,287.00

Diamond Products CC190PRO-EE First-Cut Saw 5801128

-20 %

For more information options please call us 18775581112Features Capable of .110” to .250” thick blades Self propelled drive Raise ..

$15,478.50 $19,305.00

Diamond Products CCE0911H-20 Portable Saw, Honda GX390, 20”, 5801613

-10 %

FeaturesHeavy duty design, but light-weight enough for two people to lift Cyclone air filter Easy to read built-in depth indicator Precis..

$2,695.00 $3,007.00

Husqvarna 967046103 FS 524 Flat Saw

ApplicationsSelf-propelled group of saws perfect for cutting sidewalks, driveways and other small repair or service work.BenefitsP..

$10,663.00

Husqvarna FS 309, 14" Flat Saw, Flat Saws 967678301

ApplicationsIdeal for cutting in difficult to access job sites. Utilized for very small road repair jobs. A great rental saw, it is perfect..

$2,040.00

Husqvarna FS 3500 E Flat Saws

ApplicationsIdeal for medium to small service and repair jobs when cuttingconcrete or asphalt indoors. An electric flat saw perfect for use w..

$23,068.00

Husqvarna FS 3500 G Flat Saws

ApplicationsIdeal for repair and removal of driveways and sidewalks.BenefitsImproved drive system reduces load on engine. Update..

$21,629.00

Husqvarna FS 400, 20" Flat Saw, Flat Saws 967796502

ApplicationsA great rental saw, perfect for smaller jobs such as sidewalks, driveways and city streets.BenefitsProductive push saw..

$2,445.00

Husqvarna FS 413 Flat Saw 965150107

PLEASE NOTED: HUSQVARNA FS 413 FLAT SAW WATER TANK NOT INCLUDED, AVAILABLE SEPARATELYApplicationsHandles medium to small service w..

$4,629.00

Husqvarna FS 5000 D 14" 1-Speed Flat Saws

Husqvarna FS 5000 D 14" 1-Speed Flat Saws

-22 %

ApplicationsPerfect for jobs such as airports, highways, service work, and other applications where production is a priority. Mid- to small-s..

$32,204.00 $41,460.00

Husqvarna FS 5000 D 20" 1-Speed Flat Saws

ApplicationsPerfect for jobs such as airports, highways, service work, and other applications where production is a priority. Mid- to small-s..

$41,503.00

Husqvarna FS 5000 D 26" 1-Speed Flat Saws

ApplicationsPerfect for jobs such as airports, highways, service work, and other applications where production is a priority. Mid- to small-s..

$41,807.00

Husqvarna FS 5000 D 26" 3-Speed Flat Saws

ApplicationsPerfect for jobs such as airports, highways, service work, and other applications where production is a priority. Mid- to small-s..

$47,150.00

Husqvarna FS 5000 D 30" 1-Speed Flat Saws

ApplicationsPerfect for jobs such as airports, highways, service work, and other applications where production is a priority. Mid- to small-s..

$41,984.00

Husqvarna FS 5000 D 30" 3-Speed Flat Saws

ApplicationsPerfect for jobs such as airports, highways, service work, and other applications where production is a priority. Mid- to small-s..

$47,264.00