- Cast iron impeller and volute are wear resistant for long life and minimal service.
- Pump out vanes on back of impeller reduce debris accumulation and downtime while allowing greater productivity.
- Carbon ceramic mechanical seal teamed with reliable four-cycle engine with low oil shutdown provides for increased operating life.
- High strength lightweight die cast aluminum housing increases the years of trouble-free pump life. A heavy duty protective frame provides convenient carrying handles while adding extra protection for the pump.
Specifications
PG3A | |
Dimensions | |
L x W x H in | 20.2 x 15.9 x 18.2 |
L x W x H Shipping in | 21.2 x 16.9 x 19.4 |
Diameter Suction and Discharge in | 3 |
Operating weight lb | 69 |
Shipping weight lb | 75 |
Operating data | |
Discharge Head ft | 98 |
Discharge capacity US gpm | 264 |
Suction height Lift ft | 25 |
Solids diameter Max. Size in | 0.25 |
Engine / Motor | |
Engine / Motor type | Air Cooled Single Cylinder |
Engine / Motor manufacturer | Honda |
Engine / Motor | GX160W1C2 |
Displacement in³ | 9.9 |
RPM / speed Max. Engine rpm | 3,600 |
RPM / speed Operating rpm | 3,600 |
Power Max. Rated Power hp | 4.8 |
Power Rating Specification | SAE J1349 |
Engine oil Capacity US qt | 0.63 |
Fuel type | Gasoline |
Fuel consumption US gal/h | 0.47 |
Tank capacity Fuel US qt | 3.8 |
Runtime h | 2.1 |
Hose Kits (for all 2-3" PG, PD and PT pumps) |
Extension Hose Kits (for all 2-3" pumps) |
| General | |
| Power source | Gas |
| Application | Commercial |
| Inventory | |
| Condition | New |
