Menu
Your Cart

Exmark LZS742CKC60400 Lazer Z Mower 60 Inch

Exmark LZS742CKC60400 Lazer Z Mower 60 Inch
In-Store Pickup Only
Exmark LZS742CKC60400 Lazer Z Mower 60 Inch
  • Availability: In-Store Pickup Only
  • Model: LZS742CKC60400 Lazer Z Mower 60 Inch
Product Views: 43103
$10,999.00
California Proposition 65 Warning
WARNING: This product can expose you to chemicals known to the State of California to cause cancer, birth defects, or other reproductive harm. For more information, go to www.P65Warnings.ca.gov.

Financing available, first 120 days no payment. After 120 days (48 months no interest)

 

 https://secure.sheffieldfinancial.com/newLoanApplication.aspx

More power. More features. More productivity. 

Engine
Engine ManufacturerKohler®
Engine TypeCV742
Displacement747 cc
General
TransmissionHydro-Drive
Wheel SizeFront: 13 x 6.5-6; Drive: 24 x 12-12
Fuel Capacity12 gal. (45.4 L)
Deck
Deck Size60 in.
Discharge TypeSide; Optional: Bag, Mulch

With the S-Series, you can choose from eight different engines, including an eco-friendly, Electronic Fuel Injection (EFI), propane option. Four UltraCut™ Series 4 cutting deck sizes are available with widths up to 72 inches. Want tough, try a 10-guage, formed and continuously seam-welded top and a 7-guage side skits. All with welded spindle mounting sites and full-floating 4-point suspension with four adjustable anti-scalp rollers.

    Features
    • Doing More With Propane: Our EFI system optimizes fuel delivery in real-time, which improves efficiency and performance. This, in combination with lower propane cost reduces operating expenses versus typical gas-powered mowers.
    • Less Time At The Pump: Gas-powered S-Series models have a single 12-gallon tank with one fill location.
    • Built to Last: Want tough? Try a 10-gauge, formed and continuously seam-welded top, and a 7-gauge side skirt. All with welded spindle mounting sites. And, full-floating, 4-point suspension with four adjustable anti-scalp rollers.
    • On-Board Diagnostics: Check vital functions at a glance on the digital screen. An electronic fuel gauge with low fuel warning on all Lazer Z units, battery voltage warning, hour meter and OPC safety switch monitoring make troubleshooting easy.
    • Fewer Grease Points: With just four grease points that only need annual greasing, the Lazer Z delivers maximum performance with minimum maintenance. Greaseless spindles and only four grease points on the entire machine.
    • Ultracut Series 4 Deck: This full-floating deck uses maintenance free spindle with a splined blade driver to stop bolt tightening on impacts. And, our patented bearing design on idler arm pivots only needs annual service.
    • Tool-less Belt Removal: Deck and hydro belt can be installed without using any tools.
    Decks
    • Blade Tip Speed: Approximately 18,500 fpm.
    • Blades: 3 Blades at 20.50" Length
    • Cutting Heights: 1.0" (2.5 cm) to 5.5" (11.8 cm) in 0.25" (0.64 cm) increments adjustable from operator’s seat.
    • Deck Construction: 10-gauge top that is formed and continuously seam welded, 7-gauge side skirt and 7-gauge formed and welded spindle mounting locations for improved strength and reduced weight.
    • Deck Style: Floating Deck
    • Deck Style Description: Full-floating UltraCut Series 4. Side discharge standard, with molded discharge chute and option to bag or mulch.
    • Width / Cutting Deck: 60"
    Dimensions
    • Height: 70 in. (177.8 cm)
    • Length: 83.1 in. (211.1 cm)
    • Width: 72.8 in. (184.9 cm)
    • Curb Weight: 1164
    Equipment
    • Blade Spindles: No maintenance, sealed and non-greasable spindles; 7.75"-diameter cutter housing with 25mm (.98") diameter spindle shaft and splined blade driver.
    • Cup Holder: Standard
    • Drive Tires: 24 x 12-12, 4 ply Turf Master®
    • Electrical: 12-volt battery with 15-amp alternator.
    • Front Caster Tires: 13 x 6.5-6, smooth-tread, semi-pneumatic.
    • Mower Size: full
    • Parking Brake: Lever-actuated disc brake.
    • Seat: Deluxe, two tone, bolstered seat with Elastomeric Vibration Control material. Mounted on innovative Seat Isolation System that provides operator isolation in all three planes of motion as well as fore-aft slide and seat flip-up.
    • Steering Control: Hydraulically dampened twin levers, adjust fore and aft. Adjustable dampeners (3 positions) to customize drive responsiveness. Also adjustable to 2 height positions.
    • Tractor Frame: Unibody, welded, heavy-duty 1.5" x 3" tubular steel.
    Power Components
    • Air Filter: Heavy-duty canister air filtration system
    • Carb Compliant: Yes
    • Casters: .50" thick caster yoke arms.
    • Deck Lift: Standard; foot-controlled deck lift changes cutting height and lifts the deck to maneuver around obstacles, or place in transport position.
    • Drive: Hydro-Drive
    • Drive Description: Two Exmark exclusive Parker unitized pump and wheel motor systems with no hoses, integrated cooling fans, shock valve, 1.7-quart integrated reservoir, spin-on filter and heavy-duty components. 12 cc pumps and 14. 5 cubic inch motors.
    • Drive Wheel Release: Allows unit movement without engine running.
    • Engine Brand: Kohler®
    • Engine Displacement: 747
    • Engine Model: CV742
    • Engine Series: Command™
    • Engine Speed: 3,750 rpm
    • Engine Type: Carbureted
    • Fuel Capacity: 12-gallon (45.4-L), single fuel tank with single fill location.
    • Fuel Indicator: Yes - electronic Sender
    • PTO Engagement: MagStop electromagnetic 200-ft-lb clutch with spot brake
    • ROPS: 2-post foldable ROPS standard with seat belt and latch.
    • Safety Package: Operator Presence Controls (OPC) and drive system interlock, with safety interlock system indicators.
    • Speed: Infinitely variable speed selection from 0-10.0 mph (16 kmph) forward, 0-6.0 mph (9.7 kmph) reverse.
    • Fuel Type: Gas Carbureted

     

    General
    Power sourceGas
    ApplicationCommercial
    Inventory
    ConditionNew

    Write a review

    Please login or register to review